Jaguar XJ (X350). Manual — part 42

Front Toe Adjustment (57.65.01)

1. Start the engine and center the steering wheel.


2. Turn the engine off, and hold the steering wheel in the ' straight ahead' position by
attaching a rigid link from the steering wheel to the brake pedal.


3. Check the toe settings. Follow the equipment manufacturers instructions.


4. NOTE:

Left-hand shown, right-hand similar.

Loosen the tie-rod end lock nut.

•

Clean and lubricate the lock nut and tie-rod threads.

5.

CAUTION: Do not allow the tie-rod end or steering gear boot to twist when the

tie-rod is rotated. Failure to follow this instruction may result in damage to the vehicle.

NOTE:

Left-hand shown, right-hand similar.

Rotate the tie-rod to adjust the toe setting.

www.

6. NOTE:

Make sure the tie-rod or tie-rod end does not rotate.

NOTE:

Left-hand shown, right-hand similar.

Tighten the tie-rod end lock nut.

•

Tighten to 100 Nm.

7. Recheck the toe settings. Follow the equipment manufacturers instructions.

Rear Toe Adjustment (57.65.08)

1. Check the toe settings. Follow the equipment manufacturers instructions.


2. NOTE:

Left-hand, shown right-hand similar.

Loosen the toe link lock nut.

•

Clean and lubricate the lock nut and toe link threads.

3. Rotate the toe link to adjust the toe settings.

4. Tighten the toe link lock nut.

•

Tighten to 55 Nm.

Published: Feb 7, 2002

5. Check the toe settings. Follow the equipment manufacturers instructions.

www.