Jaguar XJ (X350). Manual — part 1224
Condenser Core - 4.2L NA V8 - AJV8/4.2L
SC V8 - AJV8/3.0L NA V6 - AJ27/3.5L NA
V8 - AJV8 (82.15.07)
Installation
All vehicles
1 . Add the correct amount of A/C refrigerant oil to the A/C Condenser. <<412-00>>
2 .
CAUTION: Make sure damage does not occur to the cooling components.
Install the condensor core.
3 . NOTE:
Right-hand shown, left-hand similar
Locate the condenser in the upper fixing.
Vehicles with supercharger
4 . NOTE:
Right-hand shown, left-hand similar.
Install the cooling module retaining bolts.
Tighten to 8 Nm.
Vehicles without supercharger
5 . NOTE:
Left-hand shown, right-hand similar.
Install the condenser core retaining studs.
Tighten to 7 Nm.
6 . NOTE:
Left-hand shown, right-hand similar.
www.
Attach the power steering oil cooler.
Tighten to 7 Nm.
All vehicles
7 . Install new O-ring seals to the condenser core supply and return lines.
Lubricate O-ring seals with A/C refrigerant oil. <<412-00>>
8 . NOTE:
Un-cap the port.
Connect the lower refrigerant pipe.
Tighten to 8 Nm.
9 . Clean off any oil residue that may contain A/C system flourescent dye.
10 . Install the radiator lower cowl.
11 . Install the radiator splash shield. <<501-02>>
12 . Lower the vehicle. <<100-02>>
13 . NOTE:
Un-cap the port.
Connect the upper refrigerant pipe.
Tighten to 8 Nm.
14 . Clean off any oil residue that may contain A/C system flourescent dye.
15 . Install the radiator support bracket.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст