Jaguar XJ (X350). Manual — part 1390
Description and operation
Module Controlled Functions
Item
Part Number
Description
1
—
Front electronic module (FEM)
2
—
Driver door module (DDM)
3
—
Driver seat module (DSM)
4
—
Rear electronic module (REM)
5
—
Rear seat module
6
—
Multifunction voice activated module
Driver Seat Module (DSM)
The DSM is located under the driver seat.
The DSM controls the seat memory recall positions and seat functionality. <<501-10>>
Driver Door Module (DDM)
The DDM is located in the driver door behind the trim panel.
The DDM is involved with the following operations:
•
door window motor and regulator
•
exterior rear view mirror movement
•
keyless entry
•
global closing
•
drivers door locking/unlocking
Front Electronic Module (FEM)
The FEM is located behind the left-hand cowl side trim panel.
The FEM is involved with the following operations:
•
front exterior lighting
•
direction indicators
•
adjustable pedals
•
daytime running lamps
•
courtesy lighting
•
low brake fluid reservoir level
•
low windshield washer reservoir fluid level
•
low oil pressure
•
windshield wipers
•
rear view mirror electro-cromic function
Rear Electronic Module (REM)
The REM is located in the luggage compartment behind the right-hand luggage compartment side
trim panel.
The REM is involved with the following operations:
•
fuel pump
•
heated rear windshield
•
rear exterior lighting
•
luggage compartment lid release
•
inertia fuel cut off switch
•
passenger door locks
www.
Rear Seat Module
The rear seat module is fitted behind the rear seat, or on the ski hatch blanking plate when the rear
entertainment module is fitted.
The rear seat module is involved with the following operation:
•
manual and memory movement of electric rear seats
Multifunction Voice Activated Module
The multifunction voice activated module is located in the luggage compartment behind the left-
hand luggage compartment side trim panel. The multifunction voice activated module controls and
processes all the voice commands given by the driver, then delivers this information to the audio
unit, cellular phone, navigation and the climate control modules which then carry out these
commands.
Microphone
The microphone is used for the cellular phone and to receive voice commands for the audio unit and
climate control functions. The microphone supplies the information to the multifunction voice
control module which processes the commands and supplies the necessary information to the
correct modules.
Visual Feedback Message Center Display
This display keeps the driver informed of the function which is being selected or processed.
Audible Feedback Instrument Cluster
This audible tone informs the driver when the system is able to receive commands for processing.
Verbal Feedback Speakers
These speakers are utilized to confirm to the driver that his verbal command has been accepted and
is being processed.
Steering Wheel Control VOICE/PHONE Button
This button is automatically configured by the audio unit depending on which systems are equipped
on the vehicle. For additional information, refer to the Owner Guide.
Diagnosis and testing
Multifunction Electronic Module
Principles of Operation
For a detailed description of the Multifunction Electronic Module's, refer to the relevant Description
and Operation sections in the workshop manual.
Module Controlled Functions
Inspection and Verification
1 . Verify the customer concern.
2 . Visually inspect for obvious signs of electrical damage.
Visual Inspection Chart
Electrical
•
Fuses/Relays
•
Damaged, Loose or Corroded Connector(s)
•
Damage to Wiring Loom/Incorrect Location, Stretched or Taught
1 . If an obvious cause for an observed or reported concern is found, correct the cause (if possible)
before proceeding to the next step.
2 . If the cause is not visually evident, verify the symptom and refer to the Jaguar Approved
Diagnostic System.
DTC Index
Voice Activated Control Module
CAUTION: When probing connectors to take measurements in the course of the pinpoint
tests, use the adaptor kit, part number 3548-1358-00
NOTE:
If the control module/component is suspect and the vehicle remains under manufacturer
warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if
any prior approval program is in operation, prior to the installation of a new
module/component.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст