Jaguar XJ (X350). Manual — part 578
26
.
CAUTION: Do not allow the unions to hit the olive ends of the high-pressure fuel
supply lines as this may damage the ends of the lines and allow foreign matter enter the
fuel injection system.
Position the high-pressure fuel supply lines as near to the final installation position as
possible and then remove and discard the blanking plugs from the high-pressure fuel supply
lines.
27
.
CAUTION: Maintain pressure on the high-pressure fuel supply lines to keep the
olives in contact with the fuel injectors and the fuel rail cones while installing the unions.
NOTE:
Install the high-pressure fuel supply lines to the fuel rail end first followed by the fuel
injector end.
Install new high-pressure fuel supply lines.
Tighten the high-pressure fuel supply line in the sequence shown:
Tighten the high-pressure fuel supply line union 1 to fuel injector to 15
Nm.
Tighten the high-pressure fuel supply line union 2 to fuel rail to 15 Nm.
Tighten the high-pressure fuel supply line union 1 to fuel injector to 30
Nm.
Tighten the high-pressure fuel supply line union 2 to fuel rail to 30 Nm.
28 . Attach the fuel injection wiring harness.
29 . Connect the fuel injector electrical connectors.
30 . Install the engine harness casing.
Tighten to 4 Nm.
www.
31 . Install the engine harness cover.
32 . Install the injector sound proofing.
33
.
Install the EGR valve outlet tubes.
For additional information, refer to Exhaust Gas Recirculation (EGR) Valve Outlet Tube
(17.45.11)
34 . Install the cowl vent screen.
For additional information, refer to Cowl Vent Screen (76.10.01)
Install a new gasket.
Install the left-hand timing belt cover.
Tighten to 10 Nm.
36 . Attach the wiring harness.
37 . Tighten the power steering pump bolt.
Tighten to 22 Nm.
35 . NOTE:
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст