Jaguar XJ (X350). Manual — part 426

Drain the fluid into a suitable container.

Disconnect the power steering reservoir to power steering pump supply line.

16 . Remove the power steering pump lower retaining bolts.

17 . Disconnect the secondary air injection (AIR) control valve to exhaust manifold tube.

18 . Lower the vehicle.

19

.

CAUTION: Cap the power steering lines to prevent loss of fluid and prevent dirt

ingress.

NOTE:

CAUTION: If power steering fluid comes into contact with the paintwork, the

affected area must be immediately washed down with cold water.

NOTE:

Drain the fluid into a suitable container.

Disconnect the power steering pump to steering gear high-pressure line.

20 . Remove the power steering pump.

21 . Remove the accessory drive belt idler pulley.

www.

Vehicles with supercharger

22 . Remove the supercharger belt idler pulley and bracket assembly.

23 . Remove the supercharger belt tensioner.

All vehicles

24 . NOTE:

Vehicles with supercharger shown, vehicles without supercharger similar.

Disconnect the AIR control valve to exhaust manifold tube.

25 . NOTE:

Vehicles with supercharger shown, vehicles without supercharger similar.

Reposition the AIR control valve and bracket assembly.

Remove the retaining bolts.

Vehicles with supercharger

26 . Disconnect the AIR control valve to exhaust manifold tube.

27 . Remove the AIR control valve to exhaust manifold tube.

All vehicles

28 . Remove the power steering pump mounting bracket.

www.