Jaguar XJ (X350). Manual — part 15
502-00 : Uni-Body, Subframe and Mounting System
Front Subframe - 3.0L NA V6 - AJ27
Front Subframe - 4.2L NA V8 - AJV8/4.2L SC V8 - AJV8/3.5L NA V8 - AJV8
1. GENERAL INFORMATION
100 : Service information
100-00 : General information
Description and operation
About This Manual
Notes, Cautions and Warnings
Throughout this manual, important information is highlighted by the use of notes, cautions
and warnings. NOTES give additional information on a topic or procedure, CAUTIONS are
given to prevent damage to the vehicle, and WARNINGS are given to prevent personal
injury.
www.
Application and Use of Specifications
Torque Specifications
Torque specifications are shown in the torque specifications chart located at the front of the
relevant section.
General Service Information
Repairs and Replacements
When service parts are required, it is essential that only genuine Jaguar/Daimler replacements are
used.
Attention is drawn to the following points concerning repairs and the fitting of replacement parts
and accessories:
•
Safety features embodied in the vehicle may be impaired if other than genuine parts are
fitted. In certain territories, legislation prohibits the fitting of parts which are not produced
to the vehicle manufacturer's specification.
•
Torque wrench setting figures given in this manual must be strictly adhered to. Locking
devices, where specified, must be fitted. If the efficiency of a locking device is impaired
during removal it must be renewed.
•
Owners purchasing accessories while travelling abroad should make sure that the accessory
and its fitted location on the vehicle conform to mandatory requirements existing in their
country of origin.
•
The vehicle warranty may be invalidated by the fitting of other than genuine Jaguar/Daimler
parts. All Jaguar/Daimler replacements have the full backing of the factory warranty.
•
Jaguar/Daimler dealers are obliged to supply only genuine service parts.
Vehicle Specifications
Purchasers are advised that the specification details set out in this manual apply to a range of
vehicles and not to any specific one. For the specification of a particular vehicle, purchasers should
consult their dealer.
The Manufacturer reserves the right to vary the specifications, with or without notice, and at such
times and in such manner as the Manufacturer thinks fit. Major as well as minor changes may be
involved, in accordance with the Manufacturer's policy of continuous improvement.
Whilst every effort is made to make sure the accuracy of the particulars contained in this manual,
neither the Manufacturer nor the Dealer, by whom the manual is supplied, shall in any circumstances
be held liable for any inaccuracy or the consequences thereof.
Service Repair Operation Numbering
A master index of numbered operations has been compiled for universal application to all vehicles
manufactured by Jaguar Cars Ltd.
Each operation is allocated a number from the master index and cross-refers with an identical
number in the Repair Operation Times schedule. The number consists of six digits arranged in three
pairs.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст