Jaguar XJ (X350). Manual — part 513
185
.
CAUTION: Make sure the exhaust manifold and gasket are correctly aligned to
the cylinder head.
CAUTION: Make sure the exhaust manifold torque is checked after initial tighten.
Install the left-hand exhaust manifold.
•
Install a new gasket.
•
Tighten to 20 Nm.
186 . Install the heat shield retaining bolt.
•
Tighten to 50 Nm.
187 . Install the heat shield.
•
Tighten to 3 Nm.
188 . Install the oil level indicator and tube.
•
Install a new O-ring seal.
•
Tighten to 6 Nm.
189 . Install the starter motor.
www.
•
Tighten to 45 Nm.
190 . Attach the engine wiring harness.
191 . Attach the right hand oxygen sensor retaining bracket.
192 . Install the generator mounting bracket.
•
Tighten to 45 Nm.
193 . Attach the engine wiring harness.
194 . Install the generator.
•
Tighten the generator upper retaining bolt to 21 Nm.
•
Tighten the generator lower retaining bolt to 40 Nm.
195 . Attach the wiring harness.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст