Jaguar XJ (X350). Manual — part 764
Removal and installation
Ignition Coil-On-Plug (18.20.40)
Removal
1 . Remove the oil level indicator.
2 . NOTE:
Left-hand shown, right hand similar.
Remove the ignition coil-on-plug cover.
3 . Disconnect the ignition coil-on-plug electrical connector.
4 . Remove the ignition coil-on-plug.
Installation
1 . To install, reverse the removal procedure.
2 . Tighten to 5 Nm.
www.
303-07C : Glow Plug System
Specifications
Specifications
Description Nm lb-ft lb-in
Glow plug 10 -
89
Description and operation
Glow Plug System
Item Part Number
Description
1
Glow plug module
2
Pre-heat warning light
3
Glow plug
4
Glow plug harness
5
Glow plug fuse
The fundamental purpose of the glow plugs is to improve the cold start capability, cold start
emissions and customer perception of the vehicle, such as short glow plug times and
minimum cranking times, as well as low combustion noise at low ambient temperatures.
The maximum current when switched on will be approximately 18 Amps per glow plug at 40°
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст