Jaguar XJ (X350). Manual — part 925
DTC index
NOTE:
Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5
digits from the scan tool to the first 5 digits of the 7-digit code listed to identify the fault (the last
2 digits give extra information read by the manufacturer-approved diagnostic system).
DTC
Description
Possible causes
Action
C003100
Left front wheel speed
sensor
Invalid data received from
ABS: left front wheel
speed signal
Anti-Lock Control -
Stability Assist - VIN
Range: G45704->G99999
C003400
Right front wheel speed
sensor
Invalid data received from
ABS: right front wheel
speed signal
Anti-Lock Control -
Stability Assist - VIN
Range: G45704->G99999
C003700 Left rear wheel speed sensor
Invalid data received from
ABS: left rear wheel
speed signal
Anti-Lock Control -
Stability Assist - VIN
Range: G45704->G99999
C003A00
Right rear wheel speed
sensor
Invalid data received from
ABS: right rear wheel
speed signal
Anti-Lock Control -
Stability Assist - VIN
Range: G45704->G99999
P001100
Intake (A) camshaft position
timing - over-advanced (right
hand bank)
Cam timing has not been set
up correctly
Timing chain has slipped
Check the engine timing.
Timing Drive
Components - VIN Range:
G45704->G99999
(12.65.13)
P001200
Intake (A) camshaft position
timing - over-retarded (right
hand bank)
Cam timing has not been set
up correctly
Timing chain has slipped
Check the engine timing.
Timing Drive
Components - VIN Range:
G45704->G99999
(12.65.13)
P001600 Crankshaft position
(CKP)/Camshaft position
The relative positions of the
CKP and CMP teeth are
not correct Sensors
Reset the sensor
positions.
(CMP) sensor correlation,
right hand bank
incorrectly aligned on
rebuild
Camshaft Position (CMP)
Sensor LH (18.31.12)
Camshaft Position (CMP)
Sensor RH (18.31.11)
Crankshaft Position (CKP)
Sensor (18.30.12)
P001800
Crankshaft position
(CKP)/Camshaft position
(CMP) sensor correlation, left
hand bank
The relative positions of the
CKP and CMP teeth are
not correct Sensors
incorrectly aligned on
rebuild
Reset the sensor
positions.
Camshaft Position (CMP)
Sensor LH (18.31.12)
Camshaft Position (CMP)
Sensor RH (18.31.11)
Crankshaft Position (CKP)
Sensor (18.30.12)
P002100
Intake camshaft position
timing - over-advanced (left
hand bank)
Cam timing has not been set
up correctly
Timing chain has slipped
Check the engine timing.
Timing Drive
Components - VIN Range:
G45704->G99999
(12.65.13)
P002200
Intake camshaft position
timing - over-retarded (left
hand bank)
Cam timing has not been set
up correctly
Timing chain has slipped
Check the engine timing.
Timing Drive
Components - VIN Range:
G45704->G99999
(12.65.13)
P002672
Variable camshaft timing
(VCT) control solenoid circuit
range/performance (right
hand bank) - actuator stuck
open
Oil contamination
VCT oil flow fault
VCT solenoid fault
VCT/Camshaft mechanical
failure
Check the oil condition
and flow. For right hand
bank VCT solenoid circuit
tests, GO to Pinpoint
Test G531332p29.
P002677
Variable camshaft timing
(VCT) control solenoid circuit
range/performance (right
hand bank) - commanded
position not reachable
Oil contamination
VCT oil flow fault
VCT solenoid fault
VCT/Camshaft mechanical
failure
Check the oil condition
and flow. For right hand
bank VCT solenoid circuit
tests, GO to Pinpoint
Test G531332p29.
P002872 Variable camshaft timing
(VCT) control solenoid circuit
Oil contamination
Check the oil condition
and flow. For left hand
www.
range/performance (left
hand bank) - actuator stuck
open
VCT oil flow fault
VCT solenoid fault
VCT/Camshaft mechanical
failure
bank VCT solenoid circuit
tests, GO to Pinpoint
Test G531332p30.
P002877
Variable camshaft timing
(VCT) control solenoid circuit
range/performance (left
hand bank) - commanded
position not reachable
Oil contamination
VCT oil flow fault
VCT solenoid fault
VCT/Camshaft mechanical
failure
Check the oil condition
and flow. For left hand
bank VCT solenoid circuit
tests, GO to Pinpoint
Test G531332p30.
P003100
HO2S heater control circuit
low (right hand bank)
HO2S heater power supply
circuit: open circuit
HO2S heater control circuit:
high resistance
HO2S heater ground circuit(s)
fault
HO2S heater failure
For right hand bank HO2S
heater circuit tests, GO
to Pinpoint Test
G531332p7.
P003200
HO2S heater control circuit
high (right hand bank)
HO2S heater power supply
circuit: open circuit
HO2S heater control circuit:
high resistance
HO2S heater ground circuit(s)
fault
HO2S heater failure
For right hand bank HO2S
heater circuit tests, GO
to Pinpoint Test
G531332p7.
P003600
Catalyst monitor heater
control circuit (right hand
bank)
Catalyst monitor sensor
heater control circuit:
short circuit to ground
Catalyst monitor sensor
heater control circuit:
high resistance
Catalyst monitor sensor
heater failure
For right hand bank
catalyst monitor heater
circuit tests, GO to
Pinpoint Test
G531332p9.
P005100
HO2S heater control circuit
low (left hand bank)
HO2S heater power supply
circuit: open circuit
HO2S heater control circuit:
For left hand bank HO2S
heater circuit tests, GO
to Pinpoint Test
G531332p11.
high resistance
HO2S heater ground circuit(s)
fault
HO2S heater failure
P005200
HO2S heater control circuit
high (left hand bank)
HO2S heater power supply
circuit: open circuit
HO2S heater control circuit:
high resistance
HO2S heater ground circuit(s)
fault
HO2S heater failure
For left hand bank HO2S
heater circuit tests, GO
to Pinpoint Test
G531332p11.
P005600
Catalyst monitor heater
control circuit (left hand
bank)
Catalyst monitor sensor
heater control circuit:
short circuit to ground
Catalyst monitor sensor
heater control circuit:
high resistance
Catalyst monitor sensor
heater failure
For left hand bank
catalyst monitor heater
circuit tests, GO to
Pinpoint Test
G531332p12.
P006900
Manifold absolute pressure
(MAP) - Barometric pressure
correlation
MAP sensor failure
BARO sensor failure (internal
ECM fault)
For MAP sensor circuit
tests, vehicles without
supercharger, GO to
Pinpoint Test
G531332p33.
For MAP sensor circuit
tests, vehicles with
supercharger, GO to
Pinpoint Test
G531332p36.
Refer to the warranty
policy and procedure
manual if an ECM is
suspect.
P007100
Ambient air temperature
sensor range/performance
Ambient temperature value
missing from CAN bus
Control Components
P007200
Ambient air temperature
sensor circuit low
Ambient air temperature
sensor circuit: high
Control Components
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст