Jaguar XJ (X350). Manual — part 970
Variable Camshaft Timing (VCT) Oil
Control Solenoid (18.30.90)
Removal
1 . Remove the valve cover.
For additional information, refer to
For additional information, refer to
2 . Remove the variable camshaft timing (VCT) oil control solenoid.
Installation
1 . To install, reverse the removal procedure.
Tighten to 10 Nm.
2
.
NOTE:
For NAS vehicles only.
If required, carry out a short drive cycle.
For additional information, refer to Powertrain Control Module (PCM) Short Drive Cycle Self-
Test
www.
303-14C : Electronic Engine Controls – 2.7L V6 – TdV6
Specifications
Specifications
Torque Specifications
Description
Nm lb-ft lb-in
Camshaft position (CMP) sensor retaining bolt 10 -
89
Crankshaft position (CKP) sensor retaining bolt 5
-
44
Engine control module (ECM) retaining bolt
6
-
53
Engine control module (ECM) retaining nuts
3
-
26
Engine oil pressure (EOP) sensor
15 11 -
Knock sensor (KS) Left-Hand retaining bolt
20 15 -
Knock Sensor (KS) Right-Hand retaining bolt 20 15 -
Manifold absolute pressure (MAP) sensor
3
-
26
Mass air flow (MAF) sensor retaining screws 2
-
18
General procedures
Brake Pedal Position (BPP) Switch
Adjustment
No Data Available
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст