Jaguar XJ (X350). Manual — part 443

23 . NOTE:

Right-hand shown, left-hand similar.

Disconnect the fuel injector electrical connectors.

24 . Disconnect the fuel line.

For additional information, refer to Spring Lock Couplings

Release the retaining clip.

Remove and discard the O-ring seals.

25 . Detach the left-hand camshaft position sensor electrical connector.

26 . Disconnect the right-hand camshaft position (CMP) sensor.

27 . Disconnect the manifold absolute pressure (MAP) sensor electrical connector.

28 . Detach the engine wiring harness.

29 . Remove the intake manifold.

Remove and discard the gaskets.

www.

Installation

1 .

CAUTION: Make sure that all gasket mating faces are clean and dry.

Install the intake manifold.

Install new gaskets.

Tighten to 22 Nm.

2 . Attach the engine wiring harness.

Tighten to 10 Nm.

3 . Connect the MAP sensor electrical connector.

4 . Connect the right-hand CMP sensor.

5 . Attach the left-hand CMP sensor electrical connector.

www.