Jaguar XJ (X350). Manual — part 510
145
.
CAUTION: Do not attempt to clean the throttle body. The bore and the throttle
plate has a special coating applied during manufacture which should not be removed.
Install the throttle body.
•
Install a new throttle body gasket.
•
Tighten to 10 Nm.
146 . NOTE:
Un-cap the coolant hose.
Attach the coolant hose to the throttle body.
147 . Connect the electrical connectors.
148 . Install the EGR valve and the exhaust manifold to EGR valve tube.
•
Install a new exhaust manifold to EGR valve tube gasket.
•
Install a new EGR valve to air intake elbow gasket.
•
Tighten to 10 Nm.
149 . Tighten to 21 Nm.
www.
150 . NOTE:
Un-cap the exposed ports.
Connect the coolant hoses.
151 . Connect the exhaust gas recirculation (EGR) valve electrical connector.
152 . Connect the IAT sensor electrical connector.
153 . Connect the charge air cooler coolant pipes.
154 . Install new O-ring seals to the thermostat housing.
155 . Install thermostat housing.
156 . Tighten to 10 Nm.
157 . Tighten to 10 Nm.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст