Jaguar XJ (X350). Manual — part 1252

Left-hand drive vehicles

5 . Remove the passenger footwell vent duct. <<412-01>>

6 . Remove the glove box. <<501-12>>

7 . Remove the engine control module. <<303-14A>> <<303-14B>>

8 . Disconnect the blower motor electrical connector.

9 . Remove the blower motor housing securing bolts.

10 . Remove the blower motor housing securing bolts.

11 . Remove the blower motor housing.

12 . Remove the footwell vent/duct blend door actuator.

1) Disconnect the electrical connector.

2) Remove the footwell vent/duct blend door actuator.

www.

Installation

Right-hand drive vehicles

1 . NOTE:

Care should be taken to ensure the actuator linkages are correctly engaged.

To install, reverse the removal procedure.

Left-hand drive vehicles

2 . NOTE:

Care should be taken to ensure the actuator linkages are correctly engaged.

To install, reverse the removal procedure.

Tighten to 7 Nm.

3 . Tighten to 7 Nm.

In-Vehicle Temperature Sensor (82.20.03)

Removal

1 . Reposition the steering column to its highest position.

2 . Disconnect the battery ground cable. <<414-01>>

3 . Remove the instrument panel lower trim panel.

4 . Detach the steering column lower shroud.

5 . Remove the lower steering column lower shroud.

Disconnect the electrical connector.

www.