Jaguar XJ (X350). Manual — part 72

Install the retaining bolts.

2

.

CAUTION: The final tightening of the rear suspension components must be carried

out with the vehicle on its wheels.

Install the retaining nut and bolt.

Vehicles without Brembo brakes

3 . Attach the brake caliper.

Install new brake caliper retaining bolts.

Tighten to 103 Nm.

Vehicles with Brembo brakes

4 . Attach the brake caliper.

Install new brake caliper retaining bolts.

Tighten to 70 Nm.

All vehicles

5

.

CAUTION: The final tightening of the rear suspension components must be carried

out with the vehicle on its wheels.

Attach the stabilizer bar link.

Tighten to 48 Nm.

www.

6

.

CAUTION: The final tightening of the rear suspension components must be carried

out with the vehicle on its wheels.

Install the the shock absorber retaining bolt.

7 . Install the wheel and tire.

For additional information, refer to

Wheel and Tire (74.20.05)

8 . Lower the vehicle.

9

.

CAUTION: The final tightening of the rear suspension components must be carried

out with the vehicle on its wheels.

Tighten to 163 Nm.

10

.

CAUTION: The final tightening of the rear suspension components must be carried

out with the vehicle on its wheels.

Tighten to 175 Nm.

NOTE:

If you are re-using this fixing on a vehicle built prior to VIN H16808, then tighten old fixing to 150

Nm. If you are replacing a fixing, then you must replace both nut and bolt and tighten to 175

Nm.

11

.

CAUTION: The final tightening of the rear suspension components must be carried

out with the vehicle on its wheels.

Tighten to 48 Nm.

www.