Jaguar XJ (X350). Manual — part 1576

-> Yes
INSTALL a new passenger curtain airbag module,
Side Air Curtain Module (76.73.64) CLEAR the DTC. TEST the system for normal
operation.

-> No
INSTALL a new passenger curtain airbag harness. CLEAR the DTC. TEST the system for
normal operation.

PINPOINT TEST G1043827p12 : DTC
B2292: FLASH CODE 33: DRIVER SIDE
SEAT BELT PRETENSIONER
MALFUNCTION

G1043827t70 : CHECK THE DRIVER SIDE SEAT BELT
PRETENSIONER CIRCUIT FOR HIGH RESISTANCE

1. Disconnect the battery negative terminal. 2. Wait one minute for the system to become safe.
3. Disconnect the driver seat belt pretensioner electrical connector, SD19. 4. Disconnect the
RCM electrical connector, CR87. 5. Measure the resistance between SD19, pin 02 (GR) and
CR87, pin 31 (GR).

•

Is the resistance greater than 5 ohms?

-> Yes
INSTALL a new driver side seat belt pretensioner harness. CLEAR the DTC. TEST the
system for normal operation.

-> No
GO to Pinpoint Test G1043827t71.

G1043827t71 : CHECK THE DRIVER SIDE SEAT BELT
PRETENSIONER CIRCUIT FOR SHORT TO GROUND

1. Reconnect the battery negative terminal. 2. Measure the resistance between SD19, pin 02
(GR) and GROUND.

•

Is the resistance less than 10,000 ohms?

-> Yes
REPAIR the short circuit. For additional information, refer to the wiring diagrams. CLEAR
the DTC. TEST the system for normal operation.

-> No
GO to Pinpoint Test G1043827t72.

G1043827t72 : CHECK THE DRIVER SIDE SEAT BELT
PRETENSIONER CIRCUIT FOR SHORT TO POWER

1. Measure the voltage between SD19, pin 02 (GR) and GROUND.

•

Is the voltage greater than 3 volts?

-> Yes
REPAIR the short circuit. For additional information, refer to the wiring diagrams. CLEAR
the DTC. TEST the system for normal operation.

-> No
GO to Pinpoint Test G1043827t73.

G1043827t73 : CHECK THE DRIVER SIDE SEAT BELT
PRETENSIONER RETURN CIRCUIT FOR HIGH
RESISTANCE

1. Measure the resistance between SD19, pin 01 (GU) and CR87, pin 32 (GU).

•

Is the resistance greater than 5 ohms?

-> Yes
INSTALL a new driver side seat belt pretensioner harness. CLEAR the DTC. TEST the
system for normal operation.

-> No
GO to Pinpoint Test G1043827t74.

G1043827t74 : CHECK THE DRIVER SIDE SEAT BELT
PRETENSIONER RETURN CIRCUIT FOR SHORT TO
GROUND

1. Reconnect the battery negative terminal. 2. Measure the resistance between SD19, pin 01
(GU) and GROUND.

•

Is the resistance less than 10,000 ohms?

-> Yes
REPAIR the short circuit. For additional information, refer to the wiring diagrams. CLEAR

www.

the DTC. TEST the system for normal operation.

-> No
GO to Pinpoint Test G1043827t75.

G1043827t75 : CHECK THE DRIVER SIDE SEAT BELT
PRETENSIONER RETURN CIRCUIT FOR SHORT TO
POWER

1. Measure the voltage between SD19, pin 01 (GU) and GROUND.

•

Is the voltage greater than 3 volts?

-> Yes
REPAIR the short circuit. For additional information, refer to the wiring diagrams. CLEAR
the DTC. TEST the system for normal operation.

-> No
INSTALL a new driver side seat belt pretensioner,
Front Safety Belt Buckle (76.73.49)

PINPOINT TEST G1043827p13 : DTC
B2292: FLASH CODE 34: PASSENGER
SIDE SEAT BELT PRETENSIONER
MALFUNCTION

G1043827t76 : CHECK THE PASSENGER SIDE SEAT
BELT PRETENSIONER CIRCUIT FOR HIGH
RESISTANCE

1. Disconnect the battery negative terminal. 2. Wait one minute for the system to become safe.
3. Disconnect the passenger seat belt pretensioner electrical connector, SP19. 4. Disconnect
the RCM electrical connector, CR87. 5. Measure the resistance between SP19, pin 02 (WR)
and CR87, pin 33 (WR).

•

Is the resistance greater than 5 ohms?

-> Yes
INSTALL a new passenger side seat belt pretensioner harness. CLEAR the DTC. TEST the
system for normal operation.

-> No

GO to Pinpoint Test G1043827t77.

G1043827t77 : CHECK THE PASSENGER SIDE SEAT
BELT PRETENSIONER CIRCUIT FOR SHORT TO
GROUND

1. Reconnect the battery negative terminal. 2. Measure the resistance between SP19, pin 02
(WR) and GROUND.

•

Is the resistance less than 10,000 ohms?

-> Yes
REPAIR the short circuit. For additional information, refer to the wiring diagrams. CLEAR
the DTC. TEST the system for normal operation.

-> No
GO to Pinpoint Test G1043827t78.

G1043827t78 : CHECK THE PASSENGER SIDE SEAT
BELT PRETENSIONER CIRCUIT FOR SHORT TO
POWER

1. Measure the voltage between SP19, pin 02 (WR) and GROUND.

•

Is the voltage greater than 3 volts?

-> Yes
REPAIR the short circuit. For additional information, refer to the wiring diagrams. CLEAR
the DTC. TEST the system for normal operation.

-> No
GO to Pinpoint Test G1043827t79.

G1043827t79 : CHECK THE PASSENGER SIDE SEAT
BELT PRETENSIONER RETURN CIRCUIT FOR HIGH
RESISTANCE

1. Measure the resistance between SP19, pin 01 (WU) and CR87, pin 34 (WU).

•

Is the resistance greater than 5 ohms?

-> Yes
INSTALL a new passenger side seat belt pretensioner harness. CLEAR the DTC. TEST the

www.