Jaguar XJ (X350). Manual — part 343
3 . Carry out the front subframe alignment procedure. <<502-00>>
4 . Lower the vehicle.
5
.
CAUTION: Make sure the engine mounts locate into the correct position when the
engine is repositioned.
Using the special tools, reposition the engine.
6 . Raise the vehicle.
7 . Install the engine earth strap to the transmission.
Tighten to 10 Nm.
8 . Attach the automatic transmission oil cooler tubes retaining bracket.
Tighten to 10 Nm.
9 . NOTE:
Left-hand shown, right-hand similar.
Install the engine mounts lower retaining bolts.
Tighten to 63 Nm.
www.
10 . Detach the steering gear.
11 . Attach the steering gear.
Tighten to 100 Nm.
12 . Install the steering gear shaft pinch bolt.
Tighten to 35 Nm.
13 . Attach the power steering hose.
Tighten to 10 Nm.
14 . NOTE:
Install a new sealing washer to the oil pan drain plug
Install the oil pan drain plug
Tighten to 24 Nm.
15 . To install the generator.
Tighten to 48 Nm.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст