Jaguar XJ (X350). Manual — part 548
Engine Mount RH (12.45.03)
Special Service Tools
Engine mount retaining nut adaptor
303-1191
Power train assembly jack
HTJ1200-02
Removal
1 . Disconnect the battery ground cable.
For additional information, refer to Battery Disconnect and Connect
2 . Detach the exhaust gas recirculation (EGR) cooler coolant pipe.
3 . Detach the upper mass air flow (MAF) sensor outlet pipe.
4 . Remove the air deflector.
For additional information, refer to Air Deflector (76.11.41)
5 . Remove the generator cooling duct.
6 . Loosen the turbocharger outlet pipe retaining clips.
7 . Remove the turbocharger outlet pipe.
www.
8 . Detach the air cleaner upper outlet tube from the timing cover.
9 . Detach the air cleaner outlet tube.
1) Detach the air cleaner outlet tube to turbocharger retaining clip.
2) Detach the air cleaner outlet tube to breather tube retaining clip.
10
.
Make sure that the alignment mark on the steering gear pinion seal protection cover is
central to the steering gear pinion casting.
11 . Disconnect the power steering control valve actuator electrical connector.
12 . Detach the lower steering column.
Remove the steering gear shaft pinch bolt.
13 . Detach the starter motor positive cable.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст