Jaguar XJ (X350). Manual — part 959
Installation
1 . To install, reverse the removal procedure.
Tighten to 7 Nm.
2
.
NOTE:
Vehicles with supercharger shown, vehicles with 3.5L or 4.2L engine without
supercharger similar.
NOTE:
Left-hand shown, right-hand similar.
Tighten to 25 Nm.
Camshaft Position (CMP) Sensor RH
(18.31.11)
Removal
Vehicles with 3.5L or 4.2L engine without supercharger
1 . Remove the oil filler cap.
2 . Remove the engine cover.
Vehicles with supercharger
3 . Remove the engine cover.
www.
All vehicles
4 . Remove the cowl vent screen. <<501-02>>
5
.
NOTE:
Vehicles with supercharger shown, vehicles with 3.5L or 4.2L engine without
supercharger similar.
NOTE:
Left-hand shown, right-hand similar.
Remove the engine compartment supports.
Vehicles with supercharger
6 . Loosen the throttle body intake pipe retaining clip.
7 . Detach the air filter outlet pipe
8 . Remove the throttle body intake pipe.
1) Detach the throttle body intake pipe.
2) Remove the throttle body intake pipe.
All vehicles
9 . NOTE:
Right-hand drive vehicles shown, left-hand drive vehicles similar.
Remove the engine compartment outer panel insulation.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст