Jaguar XJ (X350). Manual — part 1606

15 . Install the steering gear.

Tighten to 100 Nm.

16 . NOTE:

Left-hand shown, right-hand similar.

Connect the headlamp leveling sensor electrical connector.

17 . NOTE:

Left-hand shown, right-hand similar.

Attach the headlamp leveling sensor retaining clip.

18 . NOTE:

Left-hand shown, right-hand similar.

Install the stabilizer bar link.

19 . NOTE:

Left-hand shown, right-hand similar.

Attach the stabilizer bar link.

Tighten to 43 Nm.

www.

20 . Install both front wheel and tires.

For additional information, refer to Wheel and Tire (74.20.05)

21 . Install the air deflector.

For additional information, refer to Air Deflector (76.11.41)

22 . Install the radiator splash shield.

For additional information, refer to Radiator Splash Shield (76.22.90)

23

.

NOTE:

The final tightening of the rear lower arm inner retaining nut and bolt must be carried

out with the vehicle on its wheels.

NOTE:

Left-hand shown, right-hand similar.

Tighten to 175 Nm.

24

.

NOTE:

The final tightening of the front lower arm inner retaining nut and bolt must be carried

out with the vehicle on its wheels.

NOTE:

Left-hand shown, right-hand similar.

Tighten to 175 Nm.

25 . NOTE:

Left-hand shown, right-hand similar.

Tighten to 70 Nm.

26 . NOTE:

Right-hand shown, left-similar.

Remove the radiator support.

www.