Jaguar XJ (X350). Manual — part 950
-> Yes
REPAIR the short circuit. For additional information, refer to the wiring diagrams. CLEAR the DTC.
TEST the system for normal operation.
-> No
GO to Pinpoint Test G531332t139.
G531332t139 : CHECK THE CMP SENSOR SENSING CIRCUIT FOR SHORT
CIRCUIT TO GROUND
1. Key off. 2. Measure the resistance between:
CMP sensor connector PI22, harness side
Battery
Pin 01
Negative terminal
Is the resistance less than 10,000 ohms?
-> Yes
REPAIR the short circuit. For additional information, refer to the wiring diagrams. CLEAR the DTC.
TEST the system for normal operation.
-> No
INSTALL a new CMP sensor.
Camshaft Position (CMP) Sensor LH (18.31.12) CLEAR the DTC. TEST the system for normal
operation.
PINPOINT TEST G531332p29 : RIGHT-
HAND VARIABLE CAMSHAFT TIMING
(VCT) OIL CONTROL SOLENOID
MALFUNCTION, CIRCUIT
MALFUNCTION
G531332t140 : CHECK ECM TO VCT SOLENOID CIRCUIT FOR HIGH
RESISTANCE
1. Key off. 2. Disconnect the VCT electrical connector, PI16. 3. Disconnect the ECM electrical
connector, PI300. 4. Measure the resistance between:
VCT connector PI16, harness side ECM connector PI300, harness side
Pin 01
Pin 86
Is the resistance greater than 5 ohms?
-> Yes
REPAIR the high resistance circuit. For additional information, refer to the wiring diagrams. CLEAR the
DTC. TEST the system for normal operation.
-> No
GO to Pinpoint Test G531332t141.
G531332t141 : CHECK ECM TO VCT SOLENOID CIRCUIT FOR SHORT CIRCUIT
TO POWER
1. Key on, engine off. 2. Measure the voltage between:
VCT connector PI16, harness side
Battery
Pin 01
Negative terminal
Is the voltage greater than 3 volts?
-> Yes
REPAIR the short circuit. For additional information, refer to the wiring diagrams. CLEAR the DTC.
TEST the system for normal operation.
-> No
GO to Pinpoint Test G531332t141.
G531332t142 : CHECK ECM TO VCT SOLENOID CIRCUIT FOR SHORT CIRCUIT
TO GROUND
1. Key off. 2. Measure the resistance between:
VCT connector PI16, harness side
Battery
Pin 01
Negative terminal
Is the resistance less than 10,000 ohms?
www.
-> Yes
REPAIR the short circuit. For additional information, refer to the wiring diagrams. CLEAR the DTC.
TEST the system for normal operation.
-> No
GO to Pinpoint Test G531332t143.
G531332t143 : CHECK VCT SOLENOID POWER
1. Measure the voltage between:
VCT connector PI16, harness side
Battery
Pin 02
Negative terminal
Is the voltage less than 10 volts?
-> Yes
REPAIR the circuit between the VCT solenoid and battery. This circuit includes splices PIS11 and
ECS72, and fuse 12 of the front power distribution box. For additional information, refer to the wiring
diagrams. CLEAR the DTC. TEST the system for normal operation.
-> No
INSTALL a new VCT solenoid.
Variable Camshaft Timing (VCT) Oil Control Solenoid (18.30.90) CLEAR the DTC. TEST the system for
normal operation.
PINPOINT TEST G531332p30 : LEFT-
HAND VARIABLE CAMSHAFT TIMING
(VCT) OIL CONTROL SOLENOID
MALFUNCTION, CIRCUIT
MALFUNCTION
G531332t144 : CHECK ECM TO VCT SOLENOID CIRCUIT FOR HIGH
RESISTANCE
1. Key off. 2. Disconnect the VCT electrical connector, PI17. 3. Disconnect the ECM electrical
connector, PI300. 4. Measure the resistance between:
VCT connector PI17, harness side ECM connector PI300, harness side
Pin 01
Pin 87
Is the resistance greater than 5 ohms?
-> Yes
REPAIR the high resistance circuit. For additional information, refer to the wiring diagrams. CLEAR the
DTC. TEST the system for normal operation.
-> No
GO to Pinpoint Test G531332t145.
G531332t145 : CHECK ECM TO VCT SOLENOID CIRCUIT FOR SHORT CIRCUIT
TO POWER
1. Key on, engine off. 2. Measure the voltage between:
VCT connector PI17, harness side
Battery
Pin 01
Negative terminal
Is the voltage greater than 3 volts?
-> Yes
REPAIR the short circuit. For additional information, refer to the wiring diagrams. CLEAR the DTC.
TEST the system for normal operation.
-> No
GO to Pinpoint Test G531332t146.
G531332t146 : CHECK ECM TO VCT SOLENOID CIRCUIT FOR SHORT CIRCUIT
TO GROUND
1. Key on, engine off. 2. Measure the resistance between:
VCT connector PI17, harness side
Battery
Pin 01
Negative terminal
Is the resistance less than 10,000 ohms?
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст