Jaguar XJ (X350). Manual — part 422

42 . Raise the vehicle.

43 . Remove the special tool.

44 . Install the CKP sensor.

Tighten to 10 Nm.

45 . Connect the CKP sensor electrical connector.

Vehicles without supercharger

46

.

Install the intake manifold.

For additional information, refer to Intake Manifold - VIN Range: G45704->G99999

(30.15.01)

Vehicles with supercharger

47 . Install the lower intake manifold.

Tighten to 22 Nm.

48 . Install the charge air cooler.

For additional information, refer to Charge Air Cooler

All vehicles

49 . Carry out the valve clearance check.

For additional information, refer to Valve Clearance Check (12.29.47)

50 Install the engine front cover.

For additional information, refer to Engine Front Cover - VIN Range: G45704->G99999

(12.65.01)

www.

Engine Front Cover - VIN Range: G00442-
>G45703 (12.65.01)

Special Service Tools

Front Pulley Lock

303-191

Front Pulley Lock Adaptor

303-191-02

Remover, Crankshaft Damper

303-588

Removal

All vehicles

1 . Remove the cooling fan motor and shroud. <<303-03A>>

2 . Remove the left-hand valve cover.

For additional information, refer to

3 . Remove the right-hand valve cover.

For additional information, refer to

Vehicles without supercharger

4 . Remove the oil cooler.

For additional information, refer to

Vehicles with supercharger

5 . Remove the supercharger drive belt. <<303-05>>

All vehicles

6 . Remove power steering pump. <<211-02>>

7 . Remove the air conditioning compressor. <<412-03>>

8 . Remove the water pump pulley.

9 . Remove the accessory drive belt idler pulley.

www.