Jaguar XJ (X350). Manual — part 467

Tighten to 22 Nm.

All vehicles

35 . Remove the special tool.

36 . Install the crankshaft position sensor.

Tighten to 10 Nm.

37 . Connect the crankshaft position sensor electrical connector.

38 . Install the air deflector.

For additional information, refer to Air Deflector (76.11.41)

39 . Install the spark plugs.

40

.

Install the engine front cover.

For additional information, refer to Engine Front Cover - VIN Range: G00442->G45703

(12.65.01)

www.

Timing Drive Components - VIN Range:
G45704->G99999 (12.65.13)

Special Service Tools

Camshaft setting tool

303-530

Timing chain tensioning tool

303-532

Crankshaft setting tool

303-645

Removal

1

.

Remove the engine front cover.

For additional information, refer to Engine Front Cover - VIN Range: G45704->G99999

(12.65.01)

2 . Remove the spark plugs.

3 . Raise the vehicle.

4 . Disconnect the crankshaft position (CKP) sensor electrical connector.

5 . Remove the CKP sensor.

6

.

CAUTION: Make sure the spark plugs are removed to enable the engine to rotate

freely.

CAUTION: Do not rotate the crankshaft counterclockwise. The timing chains may

bind causing engine damage.

CAUTION: Rotate the crankshaft clockwise to position the engine to top dead center

(TDC) No. 1 cylinder

Install the special tool 303-645.

www.