Jaguar XJ (X350). Manual — part 1480

10 . Remove the front seat cushion and cushion cover assembly.

11 . Remove the front seat backrest outer trim panel.

12 . Detach the seat base wiring harness.

13 . Disconnect the electrical connectors.

14 . Remove the front seat belt buckle.

15 . Detach the front seat cushion heater pad electrical connector.

16 . Disconnect the seat base runner motors electrical connectors.

17 . Detach the driver seat module retaining bracket.

www.

18
.

Disconnect the seat base height adjustment and cushion extend motors electrical
connectors.

19
.

NOTE:

Do not remove or carry out any repairs to the anti-whiplash system (AWS) on
the front seat back.

NOTE:

In the event of the AWS operating, there are no serviceable components.

NOTE:

Right-hand shown, left-hand similar.

Remove the seat base.

Remove the front seat backrest retaining bolts.

Installation

1
.

NOTE:

Do not remove or carry out any repairs to the anti-whiplash system (AWS) on the
front seat back.

NOTE:

In the event of the AWS operating, there are no serviceable components.

To install, reverse the removal procedure.

Tighten to 25 Nm.

2 . Tighten to 35 Nm.

www.