Jaguar XJ (X350). Manual — part 450
5 . Attach the transmission fluid cooler pipes.
Install the retaining nut.
Tighten to 10 Nm.
6 . Attach the engine wiring harness.
7 . Attach the left-hand HO2S electrical connector retaining bracket.
Install the retaining bolt.
Tighten to 10 Nm.
8 . Install the transmission bell housing to oil pan retaining bolts.
Attach the engine ground cable.
Tighten to 48 Nm.
9 . Install the CKP sensor.
Tighten to 10 Nm.
10 . Connect the CKP sensor electrical connector.
www.
11 . Attach the engine wiring harness.
12 . Attach the right-hand HO2S electrical connector retaining bracket.
Install the retaining bolt.
Tighten to 10 Nm.
13 . Install the oil strainer.
Install a new O-ring seal.
Tighten to 12 Nm.
14 . Install the oil filter housing.
Remove the blanking plugs.
Install a new O-ring seal.
Tighten to 21 Nm.
15 . Connect the engine oil pressure sensor electrical connector.
16 . Connect the engine oil temperature sensor electrical connector.
17 . Install the oil pan.
For additional information, refer to Oil Pan (12.60.44)
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст