Jaguar XJ (X350). Manual — part 439

Installation

1 .

CAUTION: Make sure that all gasket mating faces are clean and dry.

Install the intake manifold.

Install new gaskets.

Tighten to 22 Nm.

2 . Attach the exhaust gas recirculation (EGR) valve tube.

Install a new gasket.

Tighten to 22 Nm.

3 . Attach the engine wiring harness.

Tighten to 10 Nm.

4 . Connect the manifold absolute pressure (MAP) sensor electrical connector.

5 . Connect the right-hand camshaft position (CMP) sensor.

www.

6 . Connect the fuel temperature sensor electrical connector.

7 . Attach the brake booster vacumn pipe.

8 . Connect the right-hand fuel injector electrical connectors.

9 . Attach the engine wiring harness.

10 . NOTE:

Remove the cap from the coolant hose.

Connect the exhaust gas recirculation (EGR) valve coolant hose.

11 . Connect the exhaust gas recirculation (EGR) valve electrical connector.

12 . Connect the fuel pressure regulator electrical connector.

www.