Jaguar XJ (X350). Manual — part 273
•
Lower steering
column pinch bolt
loose.
•
CHECK and TIGHTEN the lower
steering column pinch bolts as
necessary. For additional
information,
•
Excessive wear in
lower steering
column.
•
CHECK for lower steering
column for wear in the
universal joints. If wear is
present, INSTALL a new lower
steering column as necessary.
•
Wear in suspension
joints.
CAUTION: DO NOT attempt to
adjust the steering gear yoke. Failure
to follow this instruction will result
in the steering gear warranty to
become invalid.
•
CHECK for excess wear in the
front suspension joints. For
additional information,
<<204-
00>>
•
Vehicle wanders from
side to side on the
road, when the
vehicle is driven
straight ahead and
the steering wheel is
held in a firm position
•
Incorrect tire
pressure or tire size.
•
CHECK and ADJUST the tire
pressure. For additional
information,
<<204-04>>
•
INSTALL a new tire as
necessary. For additional
information,
<<204-04>>
•
Vehicle is unevenly or
excessively loaded.
•
ADJUST the load evenly.
•
Loose/worn tie-rods.
•
INSTALL a new tie-rod end. For
additional information,
<<211-
03>>
•
Steering gear bolts
loose or damaged.
•
TIGHTEN or INSTALL new
bolts.
•
Loose or worn
suspension ball
joint(s).
•
INSTALL a new suspension ball
joint assembly. For additional
information,
•
Steering column
•
TIGHTEN the steering column
universal joint pinch
bolt loose.
universal joint pinch bolt. For
additional information,
<<211-
04>>
•
Incorrect toe
adjustment.
•
ADJUST as necessary. For
additional information,
<<204-
00>>
•
Loose or worn rear
suspension.
•
TIGHTEN loose, or INSTALL
new rear suspension
components. For additional
information,
•
Vehicle tends to pull
to one side when
driven on a level
surface
•
Incorrect tire
pressure.
•
Incorrect tire size or
different tire/tread
type.
•
Uneven tire wear
•
CHECK and ADJUST the tire
pressure. For additional
information,
<<204-04>>
•
INSTALL a new tire as
necessary. For additional
information,
<<204-04>>
•
Vehicle is unevenly
loaded or
overloaded.
•
Adjust the load.
•
Incorrect toe
adjustment.
•
ADJUST as necessary. For
additional information,
<<204-
00>>
•
Damaged front
suspension
components.
•
INSTALL new front suspension
components as necessary. For
additional information,
<<204-
01>>
•
Damaged rear
suspension
components.
•
INSTALL new rear suspension
components as necessary. For
additional information,
<<204-
02>>
•
Steering gear valve
effort out of balance.
•
SHIFT the transmission into
NEUTRAL while driving at no
more than 30 miles/hour (50
km/h) and turn the ignition to
position I (engine OFF-
coasting). If the vehicle does
not pull with the engine off,
INSTALL a new steering gear.
For additional information,
www.
•
If the vehicle does drift with
the engine off, CROSS SWITCH
front wheel assemblies.
•
If the vehicle pulls to the
opposite side, SWITCH wheels
that were on the rear to the
same side on the front.
•
If the vehicle pull direction is
not changed, CHECK the front
suspension components and
toe adjustments. For
additional information,
<<204-
01>>
•
Check the front and
rear brakes for
correct operation.
•
ADJUST as necessary. For
additional information,
<<206-
00>>
•
Check for bent rear
suspension
components and for
damaged coil springs
in the front
suspension.
•
INSTALL new rear suspension
components as necessary. For
additional information,
<<204-
02>>
•
INSTALL new front suspension
components as necessary. For
additional information,
<<204-
01>>
•
Check the rear
suspension for loose
or worn suspension
components.
•
TIGHTEN or INSTALL new
components as necessary. For
additional information,
<<204-
02>>
•
Incorrect underbody
alignment.
•
CHECK underbody alignment.
For additional information,
•
Poor returnability of
the steering
•
Lower steering
column interference.
•
CHECK the steering column is
free from interference from
the engine harness, sound
proofing or the floor covering.
•
Incorrect tire
pressure.
•
CHECK and ADJUST the tire
pressure. For additional
information,
<<204-04>>
•
Incorrect tire size or
type.
•
INSTALL a new tire as
necessary. For additional
information,
<<204-04>>
•
Steering column
upper shroud fouling
on the steering
wheel.
•
CHECK steering column upper
shroud for fouling. ADJUST as
necessary.
•
Steering column
universal joints
binding.
•
INSTALL a new steering
column. For additional
information,
•
Steering column shaft
floor seal binding.
•
CHECK the steering column
shaft floor seal for correct
fitment and REFIT as
necessary.
•
Steering column shaft
floor seal may be
torn.
•
INSTALL a new steering
column shaft floor seal as
necessary.
•
Binding or damaged
tie-rods.
•
CHECK tie-rod end for
excessive wear or tightness in
ball joint. INSTALL a new tie-
rod end. For additional
information,
•
Damaged or worn
front suspension
components.
•
INSTALL new front suspension
components as necessary. For
additional information,
<<204-
01>>
•
Incorrect toe
adjustment.
•
ADJUST as necessary. For
additional information,
<<204-
00>>
•
Excessive steering
efforts required
during low speed
manoeuvring and/or
during parking
manoeuvres
•
Low power steering
fluid.
•
CHECK steering system for
signs of steering fluid loss.
•
BLEED the power steering
system. For additional
information,
•
Damaged accessory
drive belt tensioner.
•
INSTALL a new accessory drive
belt tensioner.
•
Hose or cooler line
restriction.
•
CHECK hose or cooler lines for
correct routing.
•
INSTALL a new hose as
necessary.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст