Jaguar XJ (X350). Manual — part 460

31 . Install the oil strainer.

Install new O-ring seals.

Tighten to 12 Nm.

32 . Install the oil pan.

For additional information, refer to Oil Pan (12.60.44)

Secondary Timing Chain Tensioner

Special Service Tools

12mm Ribe bit socket

303-1077A

Camshaft setting tool

303-530

Timing chain tensioning tool

303-532

Crankshaft setting, main tool

303-645

Removal

1 . Remove the air deflector.

For additional information, refer to Air Deflector (76.11.41)

2 . Disconnect the crankshaft position (CKP) sensor electrical connector.

www.

3 . Remove the CKP sensor.

4 . Install the special tool.

5 . Remove the valve cover.

For additional information, refer to Valve Cover LH - VIN Range: G00442->G45703 (12.29.43)

For additional information, refer to Valve Cover LH - VIN Range: G45704->G99999 (12.29.43)

For additional information, refer to Valve Cover RH - VIN Range: G00442->G45703 (12.29.44)

For additional information, refer to Valve Cover RH - VIN Range: G45704->G99999 (12.29.44)

6 . NOTE:

Left-hand shown, right-hand similar.

Install the special tool to the left-hand cylinder head.

7 . NOTE:

Left-hand shown, right-hand similar.

Using the special tool, remove the exhaust camshaft sprocket retaining bolt.

8 . NOTE:

Left-hand shown, right-hand similar.

Remove the secondary timing chain tensioner retaining bolts.

www.