Jaguar XK. Manual — part 10
43
Keys and remote controls
R
CHANGING THE REMOTE
CONTROL BATTERY
Battery renewal
When the battery needs renewing there
will be a significant decrease in the
effective range of the key transmitter and
the message SMART KEY BATTERY
LOW is displayed on the message centre.
To renew the battery, follow the
procedure below:
1. Remove the key blade from the
Jaguar Smart Key. See USING THE
REMOTE CONTROL (page 37).
2. Remove the two side covers, one at a
time, by inserting a small, flat-bladed,
screwdriver between the cover and
body and twist the screwdriver.
3. Insert a small, flat-bladed,
screwdriver between the two body
halves of the remote handset. Apply
light pressure to the screwdriver and
separate the two halves.
4. Remove the printed circuit board,
taking care not to touch the battery
terminals. Remove the old battery
and dispose of it safely.
5. Fit a new battery cell, type CR2032
(available from your Jaguar Dealer),
with the side marked with the positive
symbol (+) downwards in the battery
receptacle. Avoid touching the new
battery as moisture and oil from the
fingers can reduce the life of the
battery and corrode the contacts.
Refit the parts in the reverse order
making sure that they click securely into
place.
PROGRAMMING THE REMOTE
CONTROL
The remote handset, Jaguar Smart Key,
and various features of the vehicle
security system can be programmed to
your individual requirements by use of the
touch-screen.
The programmable features are as
follows:
• drive-away locking
2
3
5
2
4
1
E90710
Keys and remote controls
44
L
• central or two stage locking
• sensor override
• window global open or close, passive
entry vehicles only
• valet key mode.
Selecting drive-away locking
From the main Home touch-screen
menu, select Vehicle:
1. Select Veh. settings.
2. The Security button is selected
automatically as the default.
3. Scroll down to - Drive away locking
- and select either On or Off.
Selecting central or two stage
locking
From the main Home touch-screen
menu, select Vehicle:
1. Select Veh. settings.
2. The Security button is selected
automatically as the default.
3. Select: - 2 stage unlock - On or Off.
Valet mode
From the main Home touch-screen
menu, select Vehicle:
1. Select Veh. settings.
2. The Security button is selected
automatically as the default.
3. Select Valet mode.
4. Enter a four digit Personal
Identification Number (PIN)
(personally chosen) by touching the
digit screen pad. On completion
touch the OK button. The screen
indicates that the PIN has been
accepted by displaying Valet on. If
you wish to cancel the PIN, touch the
C button at any time during entering
the number.
Vehicle
Security
Parking
Valet mode
2 stage unlock
Off
On
Vehicle
Security
Parking
Valet mode
Off
On
Global close
Off
On
Off
On
Global open
Drive away
locking
12 : 26 pm
12 : 26 pm
E93768
Vehicle
Security
Parking
Valet mode
2 stage unlock
Off
On
12 : 26 pm
E93769
45
Keys and remote controls
R
• Using the key blade, lock the glove
box.
• The luggage compartment is now
securely locked in the valet mode.
• On exiting and securing the vehicle,
hand the Jaguar Smart Key, less the
key blade, to the attendant.
Note: Ensure that the emergency key
blade is kept safely at all times.
De-selecting valet mode: When entry
into the vehicle has been gained, access
the Valet mode screen.
1. Enter your four digit PIN and touch
the OK button. The screen will
indicate that your PIN has been
accepted by displaying Valet off.
2. The luggage compartment will return
to the previously set security
requirement.
3. Unlock the glove box using the key
blade.
4. Insert the key blade into the Jaguar
Smart Key.
Note: If the PIN number has been
forgotten, the luggage compartment can
be unlocked by using the key blade in the
luggage compartment lock. This will
cancel the valet mode. See LOCKING
AND UNLOCKING (page 46).
Valet off - enter pin
Vehicle
Security
Parking
Valet mode
1
2
3
4
5
6
7
8
9
0
C
OK
12 : 26 pm
E93770
Valet on - enter pin
Vehicle
Security
Parking
Valet mode
1
2
3
4
5
6
7
8
9
0
C
OK
12 : 26 pm
E93771
Locks
46
L
Locks
KEYLESS ENTRY
The Keyless Entry function operates in
the following manner:
1. As a door handle is operated, the
vehicle emits a search signal.
2. As long as the Jaguar Smart Key is
within approximately 1.0m (3 feet 3
inches) of the operated door handle,
the signal will be acknowledged.
• The Jaguar Smart Key requires only
to be on the driver's person or in a
bag or non-metallic briefcase; it
does not require to be exposed or
handled.
3. The vehicle accepts the valid
response and allows access via either
door. The direction indicators will
flash twice (in certain markets two
audible warnings will be emitted).
• You are unlikely to notice a time lag
during this momentary process.
Two stage unlocking: Access to the
vehicle is via the first door handle
operated. The other door can be opened
by releasing the internal door lock or via
operating the exterior door handle with
the Jaguar Smart Key present.
Jaguar Smart Key check
When the last open door is closed, the
vehicle will perform a search of the
vehicle interior for the Jaguar Smart Key.
If one is not found a message SMART
KEY NOT FOUND, PLEASE INSERT IN
SLOT will be displayed for four seconds
on message centre. This is to alert the
driver that the Jaguar Smart Key may
have been inadvertently removed from
the vehicle.
LOCKING AND UNLOCKING
Note: It will not be possible to lock the
vehicle if any door, bonnet or luggage
compartment is ajar or if the inertia switch
has been tripped. See DRIVING AFTER
A COLLISION (page 260). An audible
warning will be emitted.
E90715
WARNING
The door windows partially lower
and raise automatically when the
door is opened and closed. Keep
fingers away from the windows when
closing the door. Closing an electrically
operated window on fingers, hands or
any vulnerable part of the body, can
result in serious injury.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст