Jaguar XJ (2008 year). Manual — part 83

333

JaguarVoice

R

Using the System

Initialisation

JaguarVoice is ready to operate
ten seconds after the ignition switch is
turned to position II, the system is
enabled.

Driver voice controls

The voice button is on the left-hand side
of the steering wheel, see Steering wheel
voice switches on page 332.

Some examples of using the system are
provided on the following pages for you to
try.

Note: The system will not operate until the
radio security code has been entered.

Rear occupant voice controls

There are two voice buttons on the rear
multimedia switchpack, for example
see Voice button – left on previous
illustration.

These can be operated in two different
modes:

Cabin mode – When the cabin mode
button is pressed, or when the light on the
button is illuminated, then the rear
occupants can control the audio playing
through the cabin speakers. Simply press
the voice button and give a command.

Headphone mode – When the LEFT
button is pressed, or when the light on the
button is illuminated, then the left
occupant is in headphone mode (the
control of the right-hand headphones is
identical).

In headphone mode, each occupant can
control the audio in their own headphones
by using their respective voice button,
and issuing a voice command.

JaguarVoice

334

L

First try some of these commands:

Tuning the radio

Storing a nametag to this station

Recalling the nametag you have just stored

Your instructions to the system

System response

Press and release the voice button

‘Beep’

After the beep say ‘Radio tune 98.9 FM’

The system responds with:

‘Radio tune 98.9 FM’ and tunes the radio
to this frequency

Now try entering a frequency of your own preference, see How to Say Numbers on
page 339.

Your instructions to the system

System response

Press and release the voice button

‘Beep’

After the beep say ‘Radio store name’

The system responds with: ‘Radio store
name, Name Please’

Press and release the voice button

‘Beep’

After the beep say ‘My favourite station’

The system responds with:

‘My favourite station, please say yes or
no’

Press and release the voice button

‘Beep’

After the beep say ‘Yes’

After a few seconds the system responds
with:

‘My favourite station stored’

Your instructions to the system

System response

Press and release the voice button

‘Beep’

After the beep say ‘Radio tune my
favourite station’

The system responds with:

‘Radio tune my favourite station’ and
tunes the radio to the frequency stored
with this name

Now try storing a nametag of your choice, and then recalling it.

335

JaguarVoice

R

Entering a phone number

Now try entering a phone number of your
choice and try some of the following
commands:

1. DIAL, dials the number entered.

2. STORE, stores a nametag of your

choice (as in the above example with
RADIO STORE NAME).

3. CORRECTION, deletes the last string

of digits entered, and allows you to
re-enter them.

4. CANCEL, cancels the command.

Note: When entering a number of your
choice, remember numbers can only be
given as single digits, but you can enter
the digits in as many groups as you like.

Also, when the system has read out the
numbers you have entered, you do not
have to wait for the ‘Continue entering
digits’ prompt. Simply press the voice
button and continue with your dialogue.

Your instructions to the system

System response

Press and release the voice button

‘Beep’

After the beep say ‘Phone enter zero
one six one four’

The system responds with:

‘Phone enter oh one six one four, .
Continue entering digits or say dial, store,
correction or cancel’

Press and release the voice button

‘Beep’

After the beep say ‘nine six oh nine nine
eight’

The system responds with:

nine six oh nine nine eight, . Continue
entering digits or say dial, store,
correction or cancel’

Press and release the voice button

‘Beep’

After the beep say ‘Cancel’

The system responds with:

‘Enter cancel’

JaguarVoice

336

L

Operating tips
• After pressing the voice button, wait

for the end of the single listening beep
before giving the command.*
‘LISTENING’ will be displayed on the
instrument pack or on the rear
multimedia switchpack.

• Face forward and speak naturally, as

if you were talking to a passenger or
on the phone.

• Note the structure of the commands;

remember this rather than trying to
remember all the commands.

• If you forget any of the commands, try

saying ‘VOICE HELP’. The system will
then give you a list of help menus
available, from which you can choose
the appropriate one for the command
you need.

• The Voice system will repeat the

command back to you and display it
on the message centre or rear
multimedia switchpack. The
command will then be performed.

• If you hear a double beep when you

give a command, press the voice
button and try again.*

* A single beep denotes when the voice
system is listening for a command. A
double beep denotes when the system
has stopped listening, due to an error or
when an incorrect command has been
given.

Command confirmation

After a command has been given, the
system will give feedback of what it
understood. The verbal feedback can be
switched on or off by saying ‘VOICE
FEEDBACK ON’ or ‘VOICE FEEDBACK
OFF’. Verbal feedback for help
commands, directory listings, prompts,
error messages and nametags cannot be
switched off.

For the ‘PHONE DIAL’ commands, the
system will prompt for confirmation
before making the call. This confirmation
can be switched on or off by saying
‘PHONE CONFIRMATION ON’ or
‘PHONE CONFIRMATION OFF.’

For each voice command there is an
associated visual confirmation, which is
shown on the front instrument pack or on
the rear multimedia switchpack.

Voice system prompts

During some commands and for voice
training, you will be asked by the system
for a reply. In such cases you must press
and release the voice button then speak
after the beep. The system will remind you
twice so don’t worry about having to
respond to the system immediately.

Device

Function

Setting

‘Radio Tune 97.4’