Defender (1993+). Manual — part 116
SECTION
. . . . . . . . . . . . . . . . ..
SECTION
. . . . . . . . . . . . . . ...
Published by Rover Technical Communication
Publication Part No. LRL0076USA
©1996
Rover Group Limited
BODY AND ELECTRICAL CONTENTS
Section
Number
Page
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . ..
. . . . . . . . . . . . . . . . . . . . . . . . . . . ..
. . . . . . . . . . . . . . . . . . . . . . . . . ...
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . ..
. . . . . . . . . . . . . . . . . . . . .. 7
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . ..
Interior rear view mirror . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
. . . . . . . . . . . . . . . . . . . . . . . . . . ...
. . . . . . . . . . . . . . . . . . . . . . . . . ...
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
. . . . . . . . . . . . . . . . . . . . . . . . ...
. . . . . . . . . . . . . . . . . . . . . . . . . . ...15
. . . . . . . . . . . . . . . . . . . . . . . . . . ...
. . . . . . . . . . . . . . . . . . . . ..
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . ..
. . . . . . . . . . . . . . . . . . . . . . . . . ...
. . . . . . . . . . . . . . . . . . . . . . . . . .
BODY
REAR SEAT CUSHION
REAR SEAT
SQUAB
Service repair no
-
76.71.26
Service repair no -
76.71.24
Remove
Remove
1.
Release seat cushion stowage strap.
2. Remove four bolts and spring washers and lift
seat cushion.
seat cushion from pivot brackets.
3. Remove four bolts, plain washers, spring
to body side.
washers and nuts. Detach both pivot brackets
from wheel arch.
1.
Release seat cushion stowage strap and lower
2.
Slacken two bolts securing seat squab brackets
3. Remove two bolts, plain washers, spring
washers and nuts securing seat squab to wheel
arch.
4.
Lift seat squab and release brackets from
retaining bolts.
Refit
4.
Secure pivot brackets
to wheel arch and tighten
bolts to
10
Nm
(7 Ibf.ft).
5.
Position seat cushion in pivot brackets and
secure with four bolts and spring washers.
6.
Fit stowage strap.
Refit
5.
Lower seat squab brackets over retaining bolts,
6. Secure seat squab to wheel arch, tighten bolts to
tighten bolts to
10
Nm (7 Ibf.ft).
10 Nm (7 Ibf.ft).
7 . Raise seat cushion and fit stowage strap.
1
BODY
REAR SEAT BELTS
Refit
Service repair no - 76.73.18
Remove
6.
Reverse removal procedure, ensuring seat belt
fixing bolts are tightened to 32
Nm
(24
Ibf.ft).
1.
Release belt straps from buckles on both seats.
2.
Raise both seat cushions and secure with
stowage straps.
3.
Unscrew bolt and remove bracket and inner seat
belt straps.
4.
Unscrew bolt and remove rear seat buckle strap
from wheel arch.
5.
Unscrew bolt and remove front seat buckle strap
from interior roll-over bar mounting.
2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст