Discovery 2. Manual — part 179
STEERING
REPAIRS
57-51
Damper - steering
$% 57.55.21
Remove
1. Raise front of vehicle.
WARNING: Do not work on or under a
vehicle supported only by a jack. Always
support the vehicle on safety stands.
2. Remove 2 nuts and bolts securing steering
damper to drag link and chassis.
3. Compress damper and remove from vehicle.
Refit
1. Position damper to chassis and drag link. Fit
nuts and bolts and tighten to 125 Nm (92 lbf.ft).
2. Remove stand(s) and lower vehicle.
STEERING
57-52
REPAIRS
Steering wheel
$% 57.60.01.30
Remove
1. Remove drivers airbag.
2. Disconnect horn multiplug.
3. Centralise steering wheel with road wheels in
straight ahead position.
4. Restrain steering wheel and loosen self locking
nut securing steering wheel to column.
5. Release steering wheel from column.
6. Remove and discard self locking nut.
7. Remove steering wheel.
8. Attach tape across edge of rotary coupler to
retain correct setting.
9. Release 2 clips securing each horn button to
steering wheel.
10. Remove screw securing horn earth lead to
steering wheel.
11. Disconnect radio and cruise control multiplugs.
12. Remove 2 screws securing radio switches to
steering wheel.
13. Remove radio switches from steering wheel.
14. Remove 2 screws securing cruise control
switches to steering wheel.
15. Remove cruise control switches from steering
wheel.
16. Remove horns from steering wheel.
Refit
1. Fit horn switches to steering wheel and secure
with clips.
2. Fit and tighten screw securing horn earth lead
to steering wheel.
3. Fit cruise control switches to steering wheel
and secure with screws.
4. Fit radio switches to steering wheel and secure
with screws.
5. Connect radio and cruise control multiplugs.
6. Remove tape from rotary coupler.
7. Ensure road wheels are in straight ahead
position and indicator cancelling cam are
aligned horizontally.
8. Fit steering wheel to column.
9. Connect horn multiplug.
10. Fit and tighten new self locking nut securing
steering wheel to column to 43 Nm (32 lbf.ft).
FRONT SUSPENSION
DESCRIPTION AND OPERATION
60-1
FRONT SUSPENSION
DESCRIPTION AND OPERATION
Front suspension component layout
(ACE torsion bar shown)
1 Turret RH
2 Radius arm LH
3 Anti-roll bar link LH
4 Damper LH
5 Turret LH
6 Coil spring LH
7 Torsion/anti-roll bar
8 Steering knuckle
9 Steering damper
10 Drag link
11 ACE short arm (if fitted)
12 Panhard rod
13 ACE long arm (if fitted)
14 Steering knuckle
15 Brake caliper and hub assembly
16 Radius arm RH
17 Coil spring RH
18 ACE actuator
19 Anti-roll bar link RH
20 ACE actuator
21 Anti-roll bar link RH
FRONT SUSPENSION
60-2
DESCRIPTION AND OPERATION
Front suspension components (ACE
torsion bar shown)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст