Discovery 2. Manual — part 250
SEATS
REPAIRS 76-5-31
Cover - squab - RH rear seat
$% 78.90.13
Remove
1. Remove rear seat.
2. Remove centre rear seat belt.
3. Remove 2 screws securing end cover and
remove end cover.
4. Remove both head restraint guide tubes.
5. Remove 2 screws securing squab release
lever, release cable and remove lever
assembly.
SEATS
76-5-32 REPAIRS
6. Release catches securing arm rest supports,
lower arm rest, release arm rest hinge catches
and remove arm rest assembly.
7. Release squab from 10 hooks in arm rest
recess.
8. Release top and bottom rap round clips in arm
rest recess.
9. Remove 3 studs securing squab to centre of
frame.
10. Release squab from 5 studs securing RH side.
11. Release 9 side clips securing squab to frame,
release and remove squab assembly.
12. Release squab from sides of pad to access
hog rings.
13. Remove 29 hogs rings and remove squab
cover from pad.
Refit
1. Position squab to pad and secure with hog
rings.
2. Position squab assembly to frame and secure
side clips.
3. Secure squab to hooks at RH side and fit studs
to centre of frame.
4. Fit top and bottom rap round clips and hooks in
arm rest recess.
5. Fit and secure arm rest assembly.
6. Position squab release lever, connect cable
and secure with screws.
7. Fit head restraint guide tubes.
8. Position end cover and secure with screws.
9. Fit centre rear seat belt.
10. Fit rear seat.
SEATS
REPAIRS 76-5-33
Heating element - squab - front seat
$% 78.90.36
Remove
1. Remove front seat squab cover.
SEATS, REPAIRS, Cover - squab -
2. Disconnect heating element multiplug.
3. Carefully release heating element from squab
pad, ensuring adhesive does not tear squab
pad.
Refit
1. Ensure squab pad is free of adhesive.
2. Remove adhesive cover from new heating
element, position element and secure to squab
pad.
3. Fit front seat squab cover.
SEATS, REPAIRS, Cover - squab -
Head restraint - third row seat
$% 78.50.10
Remove
1. Fold down both third row head restaints.
2. Release upper tail gate finisher from 6 clips and
remove finisher.
3. Remove 3 bolts securing head restraint and
remove head restraint.
Refit
1. Position head restraint, fit and tighten bolts.
2. Position upper tail gate finisher and secure in
clips.
M78 0493
M78 0494
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст