Discovery 2. Manual — part 147
AUTOMATIC GEARBOX - ZF4HP22 - 24
DESCRIPTION AND OPERATION
44-19
Fault effects and warning indications
Fault code,
OBD II
(TestBook)
Fault description
Effect
Warning lamp
illumination
MIL
Sport/
Manual
P0705
(14, 23)
* Gear position switch,
incorrect outputs
Maintains current gear in low range, limp
home mode in high range. Shift pressure to
maximum, harsh gear shifts/engagement.
On On
P0721
(21)
* Downshift safety
monitor prevented
downshift which would
have caused engine
overspeed
Maintains current gear in low range, limp
home mode in high range. Shift pressure to
maximum, harsh gear shifts/engagement.
On
On
P0722
(22)
* Torque converter
slipping
Maintains current gear in low range, limp
home mode in high range. Shift pressure to
maximum, harsh gear shifts/engagement.
On
On
P0731
(29)
* Ratio monitoring,
implausible 1st gear
ratio
No apparent effect
On
On
P0732
(30)
* Ratio monitoring,
implausible 2nd gear
ratio
No apparent effect
On
Off
P0733
(31)
* Ratio monitoring,
implausible 3rd gear
ratio
No apparent effect
On
Off
P0734
(32)
* Ratio monitoring,
implausible 4th gear
ratio
No apparent effect
On
Off
P0741
(5)
* Torque converter
lock-up clutch fault
May affect driveability.
On
Off
P0743
(7, 25)
* Torque converter
lock-up solenoid (MV
3), open or short circuit
Limp home mode in low and high ranges. Shift
pressure to maximum, harsh gear shifts/
engagement.
On
On
P0748
(10, 28)
* Pressure regulating
solenoid (MV 4), open
or short circuit
Limp home mode in low and high ranges. Shift
pressure to maximum, harsh gear shifts/
engagement.
On
On
P0753
(8, 26)
* Shift solenoid (MV 1),
open or short circuit
Limp home mode in low and high ranges. Shift
pressure to maximum, harsh gear shifts/
engagement.
On
On
P0758
(9, 27)
* Shift solenoid (MV 2),
open or short circuit
Limp home mode in low and high ranges. Shift
pressure to maximum, harsh gear shifts/
engagement.
On
On
P1562
(24)
* Battery supply below
9V while engine
running
Maintains current gear in low range, limp
home mode in range. Shift pressure to
maximum, harsh gear shifts/engagement.
Off
On
P1601
(4)
* ECU, EEPROM
checksum
Limp home mode in low and high ranges. Shift
pressure to maximum, harsh gear shifts/
engagement.
On
On
P1606
(3)
* EEPROM
No apparent effect
On†
Off
P1606
(6)
* Watchdog
No apparent effect
On
On
P1612
(2)
* Solenoid valves
power supply relay,
sticking closed or open
circuit
Limp home mode in low and high ranges. Shift
pressure to maximum, harsh gear shifts/
engagement.
On
On
AUTOMATIC GEARBOX - ZF4HP22 - 24
44-20
DESCRIPTION AND OPERATION
P1613
(1)
* Solenoid valves
power supply relay,
sticking open or short
circuit
Limp home mode in low and high ranges. Shift
pressure to maximum, harsh gear shifts/
engagement.
On
On
P1705
(39)
Transmission high/low
range, implausible
input
No apparent effect
On
Off
P1810
(12, 13)
Sport/Manual warning
lamp circuit fault
Lamp fails bulb check or is permanently
illuminated. No effect on gearbox operation.
On
Off
P1841
(16)
* CAN bus fault
Maintains current gear in low range, limp
home mode in high range. Shift pressure to
maximum, harsh gear shifts/engagement.
On
On
P1842
(15)
* CAN level monitoring
Maintains current gear in low range, limp
home mode in range. Shift pressure to
maximum, harsh gear shifts/engagement.
On
On
P1843
(17)
* CAN time-out
monitoring
Maintains current gear in low range, limp
home mode in high range. Shift pressure to
maximum, harsh gear shifts/engagement.
On
On
P1884
(11)
* CAN message:
Engine friction invalid
No apparent effect.
On
Off
P1884
(18)
* CAN message:
Throttle position invalid
Substitute throttle angle of 50% adopted. No
kickdown. Operates in economy modes only.
On
On
P1884
(19)
CAN message: Engine
temperature invalid
Substitute engine temperature derived from
other inputs. No apparent effect.
On
Off
P1884
(20)
CAN message: Road
speed invalid
No apparent effect
On
Off
P1884
(33, 34)
* CAN message:
Engine torque invalid
Substitute engine torque of derived from other
inputs. May affect shift quality.
On
Off
P1884
(35)
* CAN message:
Engine speed invalid
Maintains current gear in low range, limp
home mode in high range. Shift pressure to
maximum, harsh gear shifts/engagement.
On
On
P1884
(37)
CAN message: Engine
air intake temperature
invalid
No apparent effect.
On
Off
P1844
(38)
Altitude shift control
invalid
No reduced torque compensation, possible
reduction in performance/ driveability at
altitude or high ambient temperatures.
On
Off
* = Emissions (OBD II) relevant
†On = MIL illuminates immediately (in all other faults, MIL On = illuminates in the 2nd consecutive drive cycle if
fault still present)
Fault code,
OBD II
(TestBook)
Fault description
Effect
Warning lamp
illumination
MIL
Sport/
Manual
AUTOMATIC GEARBOX - ZF4HP22 - 24
ADJUSTMENTS
44-21
ADJUSTMENTS
Cable - selector
$% 44.30.04
Check
1. Position vehicle on ramp.
2. Select position 'P'.
3. Loosen selector cable trunnion nut.
4. Ensure that gearbox selector lever is in 'P'
position, (fully forward) and tighten trunnion
nut.
5. Lower ramp.
Stall test
$% 44.30.13
Testing
1. Chock the wheels and fully apply the
handbrake.
2. Start the engine and run it until it reaches
normal operating temperature.
3. Apply the footbrake and select 'D'.
4. Fully depress the accelerator pedal and note
the tachometer reading. The figures should be
as given below. Do not carry out stall test for
longer than 10 seconds, and DO NOT repeat
until 30 minutes have elapsed.
l
V8: 2200 to 2400 rev/min
l
Diesel: 2600 to 2800 rev/min
5. A reading below 1300 rev/min indicates a
torque converter fault, ie stator free-wheel.
6. A reading between 1300 and 2200 rev/min (V8)
or between 1300 and 2600 rev/min (Diesel)
indicates reduced engine power.
7. A reading above 2400 rev/min (V8) or above
2800 rev/min (Diesel) indicates clutch slip.
NOTE: The figures quoted above were
measured at sea level with an ambient
temperature of 20
°
C (68
°
F). At higher altitudes
or higher ambient temperatures, these figures
will be reduced.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст