Discovery 2. Manual — part 643
RESTRAINT SYSTEMS
REPAIRS
75-13
REPAIRS
Seat belt - front
$% 76.73.13
Remove
1. Remove 'B' post lower trim casing.
REPAIRS, Trim casing - lower - 'B' post.
2. Remove bolt securing seat belt to front seat.
3. Remove bolt securing seat belt reel to 'B' post.
4. Remove seat belt upper anchorage nut.
5. Remove seat belt.
Refit
1. Fit seat belt upper anchorage and tighten nut to
32 Nm (24 lbf.ft).
2. Fit seat belt reel to 'B' post and tighten bolt to 50
Nm (37 lbf.ft).
3. Fit seat belt to front seat and tighten bolt to 32
Nm (24 lbf.ft).
4. Fit 'B' post lower trim casing.
REPAIRS, Trim casing - lower - 'B' post.
Seat belt - rear - centre
$% 76.73.20
Remove
1. Carefully pull front carpet away from rear seat
base to gain access to front mounting brackets
of RH rear seats.
2. Remove 2 Torx bolts securing front mounting
brackets of RH rear seats to floor.
3. Recline and fold RH rear seats.
4. Remove 2 Torx bolts securing rear mounting
brackets of RH rear seats to floor.
5. Remove RH rear seats.
RESTRAINT SYSTEMS
75-14
REPAIRS
6. Remove 11 clips securing seat back finisher to
RH rear seats.
7. Remove seat back finisher.
8. Remove 15 clips securing seat base finisher to
RH rear seats.
9. Remove seat base finisher.
10. Remove bolt securing seat belt lower
anchorage to frame of RH rear seats.
11. Remove 2 screws securing guide cover to RH
rear seats
12. Remove guide cover.
13. Remove bolt securing seat belt reel to frame of
RH rear seats.
14. Remove seat belt.
Refit
1. Fit seat belt reel and tighten bolt to 32 Nm (24
lbf.ft).
2. Position seat belt through guide on top of RH
rear seats.
3. Fit seat belt lower anchorage to frame of seats
and tighten bolt to 32 Nm (24 lbf.ft).
4. Position guide cover to RH rear seats and
secure with screws.
5. Position seat base finisher to RH rear seats and
secure with clips.
6. Position seat back finisher to RH rear seats and
secure with clips.
7. Position RH rear seats and secure rear
mounting brackets to floor with Torx bolts
tightened to 45 Nm (33 lbf.ft).
8. Put RH rear seats in upright position and
secure front mounting brackets to floor with
Torx bolts tightened to 45 Nm (33 lbf.ft).
9. Position front carpet.
RESTRAINT SYSTEMS
REPAIRS
75-15
Seat belt - rear - side
$% 76.73.23
Remove
1. Remove 'D' post trim casing.
REPAIRS, Trim casing - 'D' post.
2. Remove loadspace side trim casing.
REPAIRS, Trim casing - side - loadspace.
3. Remove cap from seat belt lower anchorage
bolt.
4. Remove lower anchorage bolt.
5. Remove cover from seat belt upper anchorage
bolt.
6. Remove upper anchorage bolt.
7. Remove bolt securing seat belt reel to body.
8. Remove seat belt.
Refit
1. Fit seat belt reel to body and tighten bolt to 32
Nm (24 lbf.ft).
2. Fit seat belt upper anchorage to body and
tighten bolt to 50 Nm (37 lbf.ft).
3. Fit cover to upper anchorage bolt.
4. Fit seat belt lower anchorage to body and
tighten bolt to 32 Nm (24 lbf.ft).
5. Fit cap to lower anchorage bolt.
6. Fit loadspace side trim casing.
REPAIRS, Trim casing - side - loadspace.
7. Fit 'D' post trim casing.
RESTRAINT SYSTEMS
75-16
REPAIRS
Mounting - seat belt - 'B' post
$% 76.73.26
Remove
1. Release front door aperture seal from 'B' post.
2. Release rear door aperture seal from 'B' post.
3. Release clip securing upper 'B' post trim.
4. Remove 'B' post upper trim.
5. Remove nut securing seat belt upper
anchorage to mounting.
6. Remove 2 Torx bolts securing mounting to 'B'
post.
7. Remove mounting.
Refit
1. Fit mounting to upper 'B' post and tighten Torx
bolts to 22 Nm (16 lbf.ft).
2. Fit seat belt upper anchorage to mounting and
tighten nut to 32 Nm (24 lbf.ft).
3. Secure trim casing to 'B' post with clip.
4. Fit front and rear door aperture seals to 'B'
post.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст