Discovery 2. Manual — part 759
HARNESSES
REPAIRS
86-7-1
HARNESSES
REPAIRS
Harness - injectors - diesel
$% 86.70.22
Remove
1. Remove camshaft cover gasket.
ENGINE - Td5, REPAIRS, Gasket -
2. Disconnect engine harness from injector
harness.
3. Disconnect multiplugs from injectors. release
injector harness from camshaft carrier and
remove harness.
Refit
1. Fit new 'O' rings to injector harness connector.
2. Position harness and locate connector to
camshaft carrier.
3. Connect injector and engine harness
multiplugs.
4. Fit camshaft cover gasket.
ENGINE - Td5, REPAIRS, Gasket -
Harness - body
$% 86.70.11
Remove
3. Remove 5 studs securing sound deadening
and remove 3 sound deadening panels.
4. Remove 2 studs securing LH lower 'A' post trim
panel and remove trim panel.
HARNESSES
86-7-2
REPAIRS
5. Release and disconnect 4 multiplugs from LH
lower 'A' post.
6. Release clip and disconnect rear washer pipe
from LH lower 'A' post.
7. Release harness from behind bonnet release
cable.
8. Release harness from 4 retainers in LH upper
'A' post and collect protective sleeves.
9. Release 4 clips securing harness to centre of
roof.
10. Disconnect multiplug from ACE accelerometer.
11. Disconnect multiplug from interior mirror.
12. Feed harness through roof to upper 'A' post.
13. Release 3 retainers securing harness to RH
roof panel.
HARNESSES
REPAIRS
86-7-3
14. Release 2 cable clips securing body harness to
sunroof harness.
15. Drill out 4 rivets securing air conditioning
ducting to body, release ducting.
16. Release 2 cable ties securing harness to LH
side of body.
17. Release retainer securing harness to LH side
of body.
18. Disconnect Lucar from radio aerial LH
amplifier.
19. Remove both luggage compartment trim
casings.
REPAIRS, Trim casing - side - loadspace.
20. Disconnect 2 multiplugs from rear air
conditioning unit.
HARNESSES
86-7-4
REPAIRS
21. Remove 6 clips securing harness to LH side of
body.
22. Remove both rear tail lamps.
LIGHTING, REPAIRS, Lamp - tail.
23. Disconnect multiplugs from both tail/flasher
lamps.
24. Release 2 clips securing harness to rear
bumper.
25. Remove nut securing earth header to LH 'E'
post and remove grommet from 'E' post.
26. Disconnect multiplug from RF receiver.
27. Feed harness back to air conditioning ducting.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст