Discovery 2. Manual — part 349
HARNESSES
REPAIRS 86-7-19
31. Disconnect main harness multiplug from
engine harness and ABS sensor.
32. Disconnect multiplugs from cruise control
actuator and brake fluid level switch.
33. Withdraw harness to bulkhead.
34. Release multiplug from ACE accelerometer.
35. Remove 3 cable tie clips from body and
withdraw harness to bulkhead.
36. Disconnect multiplug from LH horn.
37. Remove LH indicator lamp.
HARNESSES
86-7-20 REPAIRS
38. Disconnect multiplugs from headlamp and
sidelamp.
39. Disconnect headlamp level multiplug from
headlamp levelling motor.
40. Release earth header behind headlamp.
41. Disconnect multiplug from front of washer
reservoir.
42. Release clip securing fog lamp multiplug.
43. Disconnect 2 multiplugs from washer pumps.
44. Remove 2 clips securing washer pipes to
washer reservoir motors.
45. Remove washer reservoir pipes.
46. Release 2 bolts securing earth points to body.
47. Pull harness into engine bay.
HARNESSES
REPAIRS 86-7-21
48. Disconnect multiplug from bonnet switch.
49. Disconnect 3 multiplugs from ABS modulator
and multiplug from ABS sensor.
50. Release LH indicator repeater lamp.
51. Disconnect multiplug from repeater lamp.
52. Remove repeater lamp.
53. Attach draw string to repeater lamp harness.
54. Pull harness into engine bay, remove draw
string and secure.
55. Disconnect multiplug from fuel cut-off switch.
56. Remove plenum moulding.
HARNESSES
86-7-22 REPAIRS
57. Disconnect and release 2 multiplugs from front
heated screen element.
58. Pull harness into engine bay.
59. Remove clip securing washer pipes to bonnet.
60. Disconnect pipe from bonnet.
61. Disconnect 11 multiplugs from ECU pack.
62. Remove 2 nuts securing earth headers to LH
lower 'A' post.
63. Disconnect 4 multiplugs from body harness.
64. Remove clip securing washer pipe located at
lower 'A' post
65. Remove pipe.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст