Discovery 2. Manual — part 299
AIR CONDITIONING
REPAIRS
82-35
ECU - air temperature control
$% 82.20.90
Remove
1. Release radio from fascia.
2. Working through radio aperture, release control
unit from fascia.
3. Disconnect 3 multiplugs and remove control
unit.
4. Collect bushes from control unit location pegs.
Refit
1. Fit bushes to new control unit.
2. Position control unit and connect multiplugs.
3. Fit control unit to fascia.
4. Fit radio to fascia.
Sensor - ambient air temperature
$% 82.20.91
Remove
1. Remove front grille.
2. Release ambient air temperature sensor from
support bracket, disconnect multiplug and
remove sensor.
Refit
1. Position sensor, connect multiplug and secure
sensor to support bracket
2. Fit front grille.
AIR CONDITIONING
82-36
REPAIRS
Sensor - solar light
$% 82.20.92
Remove
1. Carefully remove solar light sensor from fascia.
2. Disconnect multiplug from solar light sensor.
3. Remove solar light sensor.
Refit
1. Connect multiplug to solar light sensor.
2. Position solar light sensor to fascia and push to
secure.
AIR CONDITIONING
REPAIRS
82-37
Sensor - air temperature
$% 82.20.93
Remove
1. Release 2 quarter turn screws to release fascia
access panel.
2. Lower fascia access panel.
3. Disconnect multiplug from air temperature
sensor.
4. Remove 2 screws securing air temperature
sensor to fascia.
5. Remove air temperature sensor from fascia.
Refit
1. Position air temperature sensor to fascia and
secure with screws.
2. Connect multiplug to air temperature
3. Position and secure fascia access panel with
quarter turn screws.
AIR CONDITIONING
82-38
REPAIRS
Evaporator, evaporator thermistor and
thermal expansion valve (TXV)
$% 82.25.20
Remove
1. Remove heater assembly.
REPAIRS, Heater assembly - models with
air conditioning.
2. Remove bulkhead and evaporator pipe seals.
3. Disconnect multiplug from evaporator
thermistor.
4. Remove 2 screws securing temperature control
servos to evaporator casing.
5. Remove 2 screws securing coolant pipe
support bracket to casing.
6. Remove screws securing coolant pipe saddle
clamp to casing and remove saddle.
7. Remove heater matrix.
8. Remove 5 screws securing casings.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст