Discovery 2. Manual — part 343
IN CAR ENTERTAINMENT
REPAIRS 86-6-33
Switches - remote control - ICE
$% 86.50.13
Remove
1. Remove the key from the starter switch.
Disconnect both battery leads, negative lead
first. Wait ten minutes before starting work.
2. Remove driver's airbag module.
3. Release remote control switches multiplug and
leads from steering wheel base.
4. Disconnect remote control switches multiplug
from harness.
5. Remove 2 screws securing remote control
switches to steering wheel base.
6. Release and remove remote control switches
from steering wheel.
Refit
1. Fit remote control switches to steering wheel
and secure with screws.
2. Connect remote control switches multiplug to
harness.
3. Secure leads and multiplug to base of steering
wheel.
4. Fit driver's airbag module.
Amplifier - aerial
$% 86.50.29
Remove
1. Remove rear quarter upper trim casing.
REPAIRS, Trim casing - 'D' post.
2. Disconnect coaxial lead and Lucar connector
from amplifier.
3. Disconnect amplifier from aerial.
4. Remove bolt securing amplifier and remove
amplifier.
Refit
1. Position amplifier and secure with bolt.
2. Connect aerial lead, Lucar connector and
coaxial lead.
3. Fit rear quarter upper trim casing.
IN CAR ENTERTAINMENT
86-6-34 REPAIRS
Speaker - mid range - front door
$% 86.50.34
Remove
1. Remove front door trim casing.
2. Remove locknut securing speaker to front door
trim casing.
3. Remove speaker.
Refit
1. Position speaker and secure to door trim
casing using locknut.
2. Fit front door trim casing.
Speaker - high range - rear door
$% 86.50.35
Remove
1. Remove rear door trim casing.
2. Remove speaker locknut.
3. Remove speaker from door trim casing.
Refit
1. Position speaker and secure withlocknut to
rear door trim casing.
2. Fit rear door trim casing.
IN CAR ENTERTAINMENT
REPAIRS 86-6-35
Amplifier - power
$% 86.50.36
Remove
1. Release fixings and remove battery cover.
2. Disconnect battery earth lead.
3. Remove 3 screws and 1 trim clip securing lower
trim casing to LH front seat.
4. Remove lower trim casing.
5. Move seat fully rearwards.
6. Remove 3 nuts securing power amplifier
mounting bracket to body.
7. Release mounting bracket and, if applicable,
disconnect multiplug from EAT ECU on
underside of bracket.
8. Disconnect multiplug from power amplifier.
9. Remove 3 screws securing power amplifier to
mounting bracket and remove power amplifier.
Refit
1. Fit power amplifier to mounting bracket and
secure with screws.
2. Position power amplifier and mounting bracket
to body and connect power amplifier multiplug.
If applicable, also connect EAT ECU multiplug.
3. Fit bracket to body mountings and secure with
nuts.
4. Position lower trim casing to seat and secure
with fixings.
5. Connect battery earth lead.
6. Fit battery cover and secure with fixings.
IN CAR ENTERTAINMENT
86-6-36 REPAIRS
Speaker - tail door
$% 86.50.42
Remove
1. Remove tail door speaker trim casing.
REPAIRS, Trim casing - tail door speaker.
2. Remove 8 screws securing tail door speaker to
tail door trim casing.
3. Disconnect tail door speaker multiplug.
4. Remove tail door speaker.
Refit
1. Position tail door speaker to tail door and
connect multiplug.
2. Fit screws securing tail door speaker to tail door
trim casing.
3. Fit tail door speaker trim casing.
REPAIRS, Trim casing - tail door speaker.
CD autochanger
$% 86.50.60
Remove
1. Remove RH front seat.
2. Disconnect multiplug from CD autochanger.
3. Remove 4 nuts securing CD autochanger to
floor.
4. Remove CD autochanger.
5. Remove 4 screws securing mounting brackets
to CD autochanger and remove mounting
brackets.
Refit
1. Position mounting brackets to CD autochanger
and secure with screws.
2. Position CD autochanger to floor and secure
with nuts.
3. Connect multiplug to CD autochanger.
4. Fit RH front seat.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст