Range Rover. Manual — part 332
NAVIGATION SYSTEM
9
DESCRIPTION AND OPERATION
GPS Antenna
The GPS antenna is located underneath the air intake
plenum. The antenna is connected to the GPS
receiver via a single co-axial cable and passes signals
received from the GPS satellites to the receiver for
processing.
It is possible for the antenna to lose the signals from
the satellites in hilly or tree lined areas, built up areas
with tall buildings, multi-storey car parks, garages,
tunnels, bridges and during heavy rain/thunderstorms.
When the signal is lost, the navigation computer will
continue to give guidance using memory mapped data
from the CD map until the signal is restored.
Connector Details
SMB Connector 1
Pin 1 - RF signal from GPS antenna
Screen - RF ground
87
NAVIGATION SYSTEM
NEW RANGE ROVER
10
DESCRIPTION AND OPERATION
Display and Control Unit
The display and control unit is an integrated display and control unit, which allows the user to operate all the
functions of the navigation system.
1. Liquid Crystal Display (LCD)
2. Mute button
3. RE-RTE (Re-Route) button
4. Menu button
5. Repeat button
6. Navigation rotary controller
7. Photosensor
The display unit is located in the centre of the fascia. The unit comprises of a 127 mm (5 in) colour Liquid Crystal
Display (LCD) screen and controls to operate the navigation functions. The display unit comprises four control
switches, one rotary press menu control and one status LED. A photosensor is used to control the brightness of
the screen in day and night time conditions.
NAVIGATION SYSTEM
11
DESCRIPTION AND OPERATION
The D&C unit is connected with a 12-way MQL connector and a 6 way AMP connector.
C815 - 12 way MQL - White
Pin No.
Description
Input/Output
1
Red Video 50
Ω
from Nav Computer
Input
2
Video ground from Nav Computer
Input
3
Green Video & Sync 50
Ω
from Nav Computer
Input
4
Video ground from video module II
Input
5
Blue Video from video module II
Input
6
Video ground from video module II
Input
7
LCD Ground from video module II
Input
8
Not used
-
9
Not used
-
10
Not used
-
11
Not used
-
12
Not used
-
87
NAVIGATION SYSTEM
NEW RANGE ROVER
12
DESCRIPTION AND OPERATION
6 way AMP - Black
Pin No.
Description
Input/Output
1
PWM variable illumination signal
Input
2
Ground
Input
3
K-bus
Input/Output
4
+12V Permanent feed
Input
5
+12V Accessory feed
Input
6
Display Frame Rate (60Hz/50Hz) changeover signal
Input
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст