Frelander 2. Manual — part 376
3. CAUTIONS:
Make sure that the area around the component is
clean and free of foreign material.
Take extra care not to damage the mating faces.
Special Tool(s):
303-538
,
308-615
,
100-012
3.
Installation
1.
CAUTION: Take extra care not to damage the
seal.
Special Tool(s):
307-594
1.
Install the power transfer unit.
Refer to:
Power Transfer Unit - TD4 2.2L Diesel, Vehicles With: M66
6-Speed Manual Transmission AWD
(308-07B Transfer Case,
Removal and Installation).
2.
Transfer Case - Transfer Case Rear Seal
Removal and Installation
Special Tool(s)
100-012
Slide Hammer
205-053
Retainer, Drive Flange
205-871
Installer, Transfer Case Rear Seal
308-615
Remover, Seals
308-617
Depth Drill, Seal Remover
Removal
1.
WARNING: Make sure to support the vehicle with axle
stands.
Raise and support the vehicle.
1.
Remove the driveshaft.
Refer to:
Driveshaft - Vehicles W ithout: Diesel Particulate Filter
(DPF)
(205-01 Driveshaft, Removal and Installation).
Refer to:
Driveshaft - Vehicles W ith: Diesel Particulate Filter (DPF)
(205-01 Driveshaft, Removal and Installation).
2.
3.
CAUTION: Make sure that a new bolt is
installed.
• NOTE: Position cloth to collect fluid spillage.
Special Tool(s):
205-053
Torque: 48 Nm
3.
Special Tool(s):
308-617
4.
5. CAUTIONS:
Make sure that the area around the component is
clean and free of foreign material.
Take extra care not to damage the mating faces.
Special Tool(s):
308-615
,
100-012
5.
Installation
Special Tool(s):
205-871
1.
To install, reverse the removal procedure.
2.
Install the driveshaft.
Refer to:
Driveshaft - Vehicles W ithout: Diesel Particulate Filter
(DPF)
(205-01 Driveshaft, Removal and Installation).
Refer to:
Driveshaft - Vehicles W ith: Diesel Particulate Filter (DPF)
(205-01 Driveshaft, Removal and Installation).
3.
Check and top-up the transfer case fluid level.
Refer to:
Transfer Case Fluid Level Check
(308-07B Transfer Case,
General Procedures).
4.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст