Frelander 2. Manual — part 554
Seating - Front Seat Track
Removal and Installation
Removal
• NOTE: The front seat track motor is supplied as part of the front seat lower frame assembly.
1. Remove the front seat.
For additional information, refer to:
Front Seat
(501-10
Seating, Removal and Installation).
2.
3. Release the seat control switch.
4.
5. TORQUE: 25 Nm
6. TORQUE: 25 Nm
7. TORQUE: 10 Nm
8. NOTE: Do not disassemble further if the component is
removed for access only.
Installation
1.
2. To install, reverse the removal procedure.
Seating - Front Seat Track Motor
Removal and Installation
Removal
Raise the seat base for access.
1.
Remove the drive cable.
Disconnect the seat motor electrical connector.
2.
Remove the 2 clips.
3.
Remove the front seat track motor.
4.
Installation
Install the front seat track motor.
Install the drive cable.
Install the 2 clips.
1.
Install the drive cable.
Connect the seat motor electrical connector.
2.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст