Frelander 2. Manual — part 345
Automatic Transmission/Transaxle External Controls - Selector Lever
Assembly
Removal and Installation
Removal
Remove the floor console.
Refer to:
Floor Console
(501-12 Instrument Panel and Console,
Removal and Installation).
1.
Position the transmission selector lever into PARK.
Depress and hold the selector cable ball joint release button,
using a lever carefully disconnect the cable.
Release the cable.
2.
Torque: 10 Nm
3.
Installation
To install, reverse the removal procedure.
1.
Automatic Transmission/Transaxle External Controls - Selector Lever Cable
Removal and Installation
Removal
CAUTION: Make sure that the selector lever and the gearshift mechanism are in the park (P) position.
1.
WARNING: Make sure to support the vehicle with axle
stands.
Raise and support the vehicle.
1.
Remove the driveshaft.
Refer to:
Driveshaft - Vehicles W ithout: Diesel Particulate Filter
(DPF)
(205-01 Driveshaft, Removal and Installation).
2.
Remove the floor console.
Refer to:
Floor Console
(501-12 Instrument Panel and Console,
Removal and Installation).
3.
Remove the air cleaner assembly.
Refer to:
Air Cleaner
(303-12A Intake Air Distribution and Filtering -
I6 3.2L Petrol, Removal and Installation).
4.
Remove the instrument panel, lower trim panels.
5.
6.
Remove the RH instrument pack lower bracket.
7.
8.
Position the transmission selector lever into
PARK.
9.
Depress and hold the selector cable ball joint
release button, using a lever carefully
disconnect the cable.
Disconnect and remove the cable.
10.
Release the cable sealing plate.
11.
12.
13.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст