Frelander 2. Manual — part 492
Item
Part Number
Description
1
-
CJB
2
-
ATC module
3
-
Instrument cluster (Intelligent Drivers Module)
4
-
Trailer module
5
-
Driver door module
6
-
Fuel fired booster heater
7
-
Passenger door module
8
-
Seat memory module
9
-
Integrated head unit/Integrated control module - Low line audio
10
-
Integrated control module - High line audio
11
-
Parking aid module
12
-
Diagnostic socket
CONTROL DIAGRAM - HIGH SPEED CAN BUS
• NOTE: D = High speed CAN bus
Item
Part Number
Description
1
-
CJB
2
-
Diagnostic socket
3
-
Restraints Control Module (RCM)
4
-
Steering wheel angle sensor
5
-
Occupant classification sensor - North American Specification (NAS) vehicles only
6
-
Electronic rear differential control module
7
-
TCM
8
-
Headlamp leveling control module
9
-
Terrain Response control module
10
-
Anti-lock Brake System (ABS) module
11
-
ECM - TD4
12
-
ECM - i6
CONTROL DIAGRAM - MOST
• NOTE: P = MOST
Item
Part
Number
Description
1
-
Integrated control module
2
-
Integrated head unit
3
-
High Defination (HD) radio module (NAS only from 2009MY)
4
-
Digital Audio Broadcast (DAB) receiver / Satellite Digital Audio Radio Sytem (SDARS) (NAS only from
2009MY) receiver
5
-
Bluetooth telephone module
6
-
Amplifier
7
-
Satellite navigation computer
8
-
Touch Screen Display (TSD)
Module Communications Network - Communications Network
Diagnosis and Testing
Principles of Operation
For a detailed description of the Communications Network, refer to the relevant Description and Operation section in the
workshop manual.
REFER to:
Communications Network
(418-00 Module Communications Network, Description and Operation).
Inspection and Verification
CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does
not guarantee confirmation of a fault, and may also cause additional faults in the vehicle being tested and/or the donor
vehicle.
1. Verify the customer concern.
1.
2. Visually inspect for obvious signs of mechanical or electrical damage and system integrity.
2.
Visual Inspection
Electrical
Fuses (refer to electrical guide)
W iring harness
Correct engagement of electrical connectors
Loose or corroded connections
Routing of fibre optic harnesses
Correct engagement of optical connectors
Correct placement of optical connectors (ring order)
Correct assembly of optical connectors (backout, etc)
Damage to fibre (chafing, abrasion, kinking, cuts, etc)
3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before
proceeding to the next step
3.
4. If the cause is not visually evident, check for Diagnostic Trouble Codes (DTCs) and refer to the DTC Index.
4.
For a complete list of all diagnostic trouble codes that could be logged on this vehicle, please refer to section 100-00.
REFER to:
Diagnostic Trouble Code (DTC) Index - DTC: Body Control Module (BCM)
(100-00 General Information,
Description and Operation).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст