Frelander 2. Manual — part 28
DTC
Description
Possible Cause
Action
U0193-00 Lost communications
with digital audio
control module 'A'
Lost communications
Carry out pinpoint tests associated with this DTC
using the manufacturer approved diagnostic
system
U0197-00 Lost communications
with telephone control
module
Lost communications
Carry out pinpoint tests associated with this DTC
using the manufacturer approved diagnostic
system
U0199-00 Lost communications
with DDM
Lost communications
Carry out MOST Network integrity tests using
manufacturer approved diagnostic system. Check
DDM for DTCs and refer to relevant DTC Index
below
U0200-00 Lost communications
with PDM
Lost communications
Carry out MOST Network integrity tests using
manufacturer approved diagnostic system. Check
PDM for DTCs and refer to relevant DTC Index
below
U0214-00 Lost communications
with remote function
actuation
Lost communications
Carry out CAN Network integrity tests using
manufacturer approved diagnostic system. Check
remote keyless entry module for DTCs and refer
to relevant DTC Index below
U0245-00 Lost communications
with entertainment
control module - front
Lost communications
Carry out MOST Network integrity tests GO to
Pinpoint Test ??. . Check for additional DTCs and
refer to relevant DTC Index
U0256-00 Lost communications
with front controls
interface module
Lost communications
Carry out MOST Network integrity tests GO to
Pinpoint Test ??. . Check for additional DTCs and
refer to relevant DTC Index
U0257-00 Lost communications
with front
controls/display
interface module
Lost communications
Carry out MOST Network integrity tests GO to
Pinpoint Test ??. . Check for additional DTCs and
refer to relevant DTC Index
U0300-00 Internal control module
software
incompatibility
Incorrect software
Check software level is correct to hardware level
U0300-51 Internal control module
software
incompatibility
Not programmed
Download the correct level of software using the
manufacturer approved diagnostic system
U3000-55 Control module
Incorrect car configuration data
received
Check/up-date Car Configuration File using
manufacturer approved diagnostic system
U3000-87 Control module
Missing message
Check CJB for DTCs and refer to DTC Index.
For additional information, refer to:
Communications Network
(418-00 Module
Communications Network, Diagnosis and
Testing).
Check information and entertainment module for
Car Configuration File and MOST network DTCs
and refer to relevant DTC Index. Carry out
MOST/CAN network tests using the manufacturer
approved diagnostic system
U3002-81 Vehicle Identification
Number
Incorrect VIN stored and
locked (module previously
installed to other vehicle)
Ensure correct component is installed to vehicle
U3003-62 Battery voltage
Mis-match in battery voltage,
of 2 volts or more, between
information and entertainment
control module and CJB
Carry out pinpoint tests associated with this DTC
using the manufacturer approved diagnostic
system
General Information - Diagnostic Trouble Code (DTC) IndexDTC:
Infotainment Control Module (ICM) - Low Line
Description and Operation
• NOTE: If a control module or component is suspect and the vehicle remains under manufacturer warranty, refer to the
Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval program is in operation, before
the replacement of a component.
• NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan
tool to the first 5 digits of the 7-digit code listed to identify the fault (the last 2 digits give extra information read by the
manufacturer-approved diagnostic system).
• NOTE: When performing voltage or resistance tests, always use a digital multimeter (DMM) accurate to three decimal
places, and with an up-to-date calibration certificate. W hen testing resistance always take the resistance of the DMM
leads into account.
• NOTE: Check and rectify basic faults before beginning diagnostic routines involving pinpoint tests.
• NOTE: Inspect connectors for signs of water ingress, and pins for damage and/or corrosion.
• NOTE: If DTCs are recorded and, after performing the pinpoint tests, a fault is not present, an intermittent concern may
be the cause. Always check for loose connections and corroded terminals.
Description And Operation
For a detailed description of the infontainment control system, refer to the relevant Description and Operation section in
the workshop manual.
For additional information, refer to:
Audio System
(415-01 Information and Entertainment System, Description and
Operation).
Infotainment control module (low line) (ICM)
DTC
Description
Possible Cause
Action
B1A00-16 Control module
Supply voltage low
Carry out pinpoint tests associated with this DTC using the
manufacturer approved diagnostic system
B1A01-01 Speaker #1
Left front speaker
circuit - short circuit
Carry out pinpoint tests associated with this DTC using the
manufacturer approved diagnostic system
B1A01-13 Speaker #1
Left front speaker
circuit - open circuit
Refer to the electrical circuit diagrams and check left front
speaker circuit for open circuit
B1A02-01 Speaker #2
Right front speaker
circuit - short circuit
Carry out pinpoint tests associated with this DTC using the
manufacturer approved diagnostic system
B1A02-13 Speaker #2
Right front speaker
circuit - open circuit
Refer to electrical circuit diagrams and check right front
speaker circuit for open circuit
B1A03-01 Speaker #3
Left rear speaker
circuit - short circuit
Carry out pinpoint tests associated with this DTC using the
manufacturer approved diagnostic system
B1A03-13 Speaker #3
Left rear speaker
circuit - open circuit
Refer to electrical circuit diagrams and check left rear
speaker circuit for open circuit
B1A04-01 Speaker #4
Right rear speaker
circuit - short circuit
Carry out pinpoint tests associated with this DTC using the
manufacturer approved diagnostic system
B1A04-13 Speaker #4
Right rear speaker
circuit - open circuit
Refer to electrical circuit diagrams and check right rear
speaker circuit for open circuit
B1A56-14 Antenna
Antenna circuit -
short to ground,
open circuit
Refer to electrical circuit diagrams and check antenna
circuit for short ground, open circuit
B1D19-96 Compact disc unit
Component internal
failure
Install a new compact disc unit, refer to the new
module/component installation note at the top of the DTC
Index.
For additional information, refer to:
Audio Unit
(415-01
Information and Entertainment System, Removal and
Installation).
B1D19-98 Compact disc unit
Compact disc unit
over temperature
Check for additional DTCs and refer to DTC Index,
check/monitor system for re-occurrence
B1D20-91 Head unit
Head unit below
temperature
Check for additional DTCs and refer to DTC Index,
check/monitor system for re-occurrence
B1D20-98 Head unit
Head unit over
temperature
Check for DTCs and refer to DTC Index, check/monitor
system for re-occurrence
B1D21-11 Remote control switch
Remote control
switch circuit - short
to ground
Refer to electrical circuit diagrams and check remote control
switch circuit for short to ground
DTC
Description
Possible Cause
Action
B1D21-13 Remote control switch
Remote control
switch circuit - open
circuit
Refer to electrical circuit diagrams and check remote control
switch circuit for open circuit
U0010-87 Medium speed CAN
communications Bus
Missing message
Carry out pinpoint tests associated with this DTC using the
manufacturer approved diagnostic system
U0010-88 Medium Speed CAN
Communication Bus
Bus Off
Carry out CAN network integrity tests using the
manufacturer approved diagnostic system
U0073-88 Control module
communication Bus 'A'
off
Bus Off
Carry out pinpoint tests associated with this DTC using the
manufacturer approved diagnostic system
U0300-55 Internal control module
software incompatibility
Incorrect Car
Configuration File
Incorrect component
installed
Check/amend Car Configuration File using manufacturer
approved diagnostic system. Install correct component
U1A03-87 Car Configuration
Parameter
Missing message
Check/amend the Car Configuration File using the
manufacturer approved diagnostic system. Carry out CAN
network integrity tests using the manufacturer approved
diagnostic system
General Information - Diagnostic Trouble Code (DTC) IndexDTC:
Instrument Cluster (IPC)
Description and Operation
• NOTE: If a control module or component is suspect and the vehicle remains under manufacturer warranty, refer to the
Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval program is in operation, before
the replacement of a component.
• NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan
tool to the first 5 digits of the 7-digit code listed to identify the fault (the last 2 digits give extra information read by the
manufacturer-approved diagnostic system).
• NOTE: When performing voltage or resistance tests, always use a digital multimeter (DMM) accurate to three decimal
places, and with an up-to-date calibration certificate. W hen testing resistance always take the resistance of the DMM
leads into account.
• NOTE: Check and rectify basic faults before beginning diagnostic routines involving pinpoint tests.
• NOTE: Inspect connectors for signs of water ingress, and pins for damage and/or corrosion.
• NOTE: If DTCs are recorded and, after performing the pinpoint tests, a fault is not present, an intermittent concern may
be the cause. Always check for loose connections and corroded terminals.
Description And Operation
For a detailed description of the instrument cluster system, refer to the relevant Description and Operation section in the
workshop manual.
For additional information, refer to:
Instrument Cluster
(413-01 Instrument Cluster, Description and Operation).
Instrument cluster control module (IPC)
DTC
Description
Possible Cause
Action
B1184-62 Steering Column Lock
Output
Signal compare failure
Check steering lock power from CJB. Check CJB for
DTCs and refer to relevant DTC Index.
For additional information, refer to:
Communications Network
(418-00 Module
Communications Network, Diagnosis and Testing).
B1A14-96 RCM W arning Lamp
Light Emitting Diode (LED)
failure
Install a new instrument cluster.
For additional information, refer to:
Instrument
Cluster
(413-01 Instrument Cluster, Removal and
Installation).
Refer to the new module/component installation
note at the top of the DTC Index
B1A84-41 Car Configuration Data
Flash download checksum
error
Install latest available level of software using the
manufacturer approved diagnostic system
B1A84-81 Car Configuration Data
Invalid Car Configuration
data received
Check/amend Car Configuration File using
manufacturer approved diagnostic system
C2002-62 Odometer Tampered
DTC set when one or more
stored odometer value does
not match
Clear DTC, cycle ignition and re-test
U0010-87 Medium Speed CAN
Communication Bus
Multiple loss of CAN data to
other systems
Carry out pinpoint tests associated with this DTC
using the manufacturer approved diagnostic
system
U0010-88 Medium Speed CAN
Communication Bus
Break in connection to bus
Carry out pinpoint tests associated with this DTC
using the manufacturer approved diagnostic
system
U0140-08 Lost Communication
With Body Control
Module
No messages received from
CJB for greater than timeout
period
Carry out pinpoint tests associated with this DTC
using the manufacturer approved diagnostic
system
U0208-08 Lost Communication
With "Seat Control
Module A"
No messages received from
DSM for greater than
timeout period
Check DSM for DTCs and refer to relevant DTC
Index.
For additional information, refer to:
Seats
(501-10
Seating, Diagnosis and Testing).
Carry out CAN Network integrity tests using the
manufacturer approved diagnostic system
U0300-62 Internal Control Module
Software Incompatibility
Configuration data received
is different from the stored
data
Check correct instrument cluster is installed
U3000-46 Control Module
EEPROM write error
Check power and ground circuits to the instrument
cluster, clear DTC and re-test. If DTC remains,
install a new instrument cluster.
For additional information, refer to:
Instrument
Cluster
(413-01 Instrument Cluster, Removal and
Installation).
Refer to the new module/component installation
note at the top of the DTC Index
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст