Frelander 2. Manual — part 543
Rear View Mirrors - Exterior Mirror
Removal and Installation
Removal
• NOTE: Removal steps in this procedure may contain installation details.
Lower the window glass.
1.
Disconnect the battery ground cable.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
2.
Remove the front door trim panel.
Refer to:
Front Door Trim Panel
(501-05 Interior Trim and
Ornamentation, Removal and Installation).
3.
Remove the front door frame trim.
4.
Torque: 10 Nm
5.
Installation
To install, reverse the removal procedure.
1.
Rear View Mirrors - Exterior Mirror Motor
Removal and Installation
Removal
• NOTE: Removal steps in this procedure may contain installation details.
Remove the exterior mirror glass.
Refer to:
Exterior Mirror Glass
(501-09 Rear View Mirrors, Removal
and Installation).
1.
Torque: 5 Nm
2.
Installation
To install, reverse the removal procedure.
1.
Seating -
Torque Specifications
Description
Nm
lb-ft
Adaptor bracket - cushion frame screw
45
33
Cushion frame - pretensioner bolt
45
33
Front seat armrest Torx bolt
10
7
Front seat control switch screws
1
1
Front seat cushion bolts
25
18
Front seat tilt motor bolts
10
7
Heater mat control unit bracket screws
3
2
Front seat Torx bolts*
40
30
Front seat height adjustment motor nuts
25
18
Rear center seat belt attachment bolt
47
35
Rear seat cushion bolts
25
18
Rear seat outer pivot bolt
35
26
Rear seat latch attachment bolts
23
17
Seat module bracket Torx bolts
3
1
Squab frame to cushion frame
21
15
Squab frame - Side airbag nut
9
7
Track - Assembly adaptor bracket nuts
21
15
Track - Front and rear foot nuts
21
15
*New nuts/bolts must be fitted
Seating - Seats
Description and Operation
COMPONENT LOCATION
• NOTE: Left-Hand Drive (LHD) shown; Right-Hand Drive (RHD) similar.
Item
Part Number
Description
1
-
Automatic Temperature Control (ATC) module
2
-
Front seat heating control switches
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст