Frelander 2. Manual — part 86
Install the rear differential rear bush retaining bolts.
Torque: 110 Nm
Install the LH halfshaft.
Refer to:
Rear Halfshaft LH
(205-05 Rear Drive Halfshafts, Removal
and Installation).
9.
Connect the Active On-demand Coupling module electrical connector.
10.
Install the driveshaft rear support bracket.
Torque: 35 Nm
11.
12.
CAUTION: Make sure that new bolts are
installed.
Connect the driveshaft to the rear flange.
Torque: 40 Nm
12.
Install the rear muffler.
Refer to:
Exhaust System
(309-00A Exhaust System - I6 3.2L Petrol,
Removal and Installation).
13.
Install the LH rear wheel and tire.
Refer to:
Wheel and Tire
(204-04 W heels and Tires, Removal and
Installation).
14.
Check and top-up the active on-demand coupling fluid level.
Refer to:
Active On-Demand Coupling Filling
(205-02 Rear Drive
Axle/Differential, General Procedures).
15.
Fill the differential case with fluid.
Refer to:
Differential Draining and Filling
(205-02 Rear Drive
Axle/Differential, General Procedures).
16.
Rear Drive Axle/Differential - Differential Support Insulator
Removal and Installation
Removal
1.
WARNING: Make sure to support the vehicle with axle
stands.
Raise and support the vehicle.
1.
Remove the exhaust system.
Refer to:
Exhaust System
(309-00A Exhaust System - I6 3.2L Petrol,
Removal and Installation).
2.
3.
WARNING: Make sure to support the vehicle with axle
stands.
Support the rear differential using a transmission jack.
3.
4.
CAUTION: Mark the components to aid
installation.
Discard the bolts.
4.
5.
Installation
Install the rear differential insulator to the rear differential.
Torque: 35 Nm
1.
2. CAUTIONS:
Make sure that new bolts are installed.
2.
Make sure that the installation marks are aligned.
Install the rear differential front bush retaining bolts.
Torque: 175 Nm
Install the exhaust system.
Refer to:
Exhaust System
(309-00A Exhaust System - I6 3.2L Petrol,
Removal and Installation).
3.
Rear Drive Axle/Differential - Differential Front Bushing
Removal and Installation
Special Tool(s)
205-860-01
Remover, Differential Bushing
205-860-02
Remover, Differential Bushing
205-860-03
Installer, Differential Bushing
205-860-04
Installer, Differential Bushing
205-860-09
Installer, Differential Bushing
205-860-10
Spacer, Differential Bushing
LR-121
Hydraulic Cylinder 10t
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст