Frelander 2. Manual — part 115
Parking Brake and Actuation - Parking Brake Control
Removal and Installation
Removal
Remove the floor console.
Refer to:
Floor Console
(501-12 Instrument Panel and Console,
Removal and Installation).
1.
Torque: 25 Nm
2.
Installation
To install, reverse the removal procedure.
1.
Adjust the parking brake.
Refer to:
Parking Brake Cable Adjustment
(206-05 Parking Brake and
Actuation, General Procedures).
2.
Parking Brake and Actuation - Parking Brake Warning Indicator Switch
Removal and Installation
Removal
Remove the floor console.
Refer to:
Floor Console
(501-12 Instrument Panel and Console,
Removal and Installation).
1.
Release the vehicle parking brake.
2.
Remove the parking brake switch.
3.
Installation
To install, reverse the removal procedure.
1.
Parking Brake and Actuation - Parking Brake Front Cable
Removal and Installation
Removal
• NOTE: The parking brake front cable is part of the parking brake control.
Remove the parking brake control.
Refer to:
Parking Brake Control
(206-05 Parking Brake and Actuation,
Removal and Installation).
1.
Installation
Install the parking brake control.
Refer to:
Parking Brake Control
(206-05 Parking Brake and Actuation,
Removal and Installation).
1.
Parking Brake and Actuation - Parking Brake Rear Cables
Removal and Installation
Removal
Remove the coin tray.
1.
Remove the stowage compartment.
2.
Remove the adjusting nut and disconnect the front parking brake
cable.
3.
Release the rear parking brake cables and remove the
compensator.
4.
5.
WARNING: Do not work on or under a vehicle supported only
by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
5.
Remove both rear wheels and tires.
Refer to:
Wheel and Tire
(204-04 W heels and Tires, Removal and
Installation).
6.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст