Frelander 2. Manual — part 328
Automatic Transmission/Transaxle - Transmission Control Module (TCM)I6
3.2L Petrol
Removal and Installation
Removal
1.
WARNING: Make sure to support the vehicle with axle
stands.
Raise and support the vehicle.
1.
Remove the cover and disconnect the battery ground cable.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
2.
Remove the A/C compressor mounting bracket.
Refer to:
Accessory Drive Component Bracket
(303-05A Accessory
Drive - I6 3.2L Petrol, Removal and Installation).
3.
Release and disconnect the selector lever cable.
4.
Release the support bracket.
5.
Remove the transmission selector lever.
6.
7.
Installation
Install the TCM.
Torque: 24 Nm
1.
Install the transmission selector lever.
Torque: 13 Nm
2.
Secure and connect the selector lever cable.
3.
Install the support bracket.
Torque: 25 Nm
4.
Install the A/C compressor mounting bracket.
Refer to:
Accessory Drive Component Bracket
(303-05A Accessory
Drive - I6 3.2L Petrol, Removal and Installation).
5.
Connect the battery ground cable and install the cover.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
6.
If a new component has been installed, configure using Land Rover
approved diagnostic equipment.
7.
Automatic Transmission/Transaxle - Transmission Control Module
(TCM)TD4 2.2L Diesel
Removal and Installation
Removal
1.
WARNING: Make sure to support the vehicle with axle
stands.
Raise and support the vehicle.
1.
Remove the cover and disconnect the battery ground cable.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
2.
Remove the air cleaner assembly.
Refer to:
Air Cleaner
(303-12A Intake Air Distribution and Filtering -
I6 3.2L Petrol, Removal and Installation).
3.
Release and disconnect the selector lever cable.
4.
Remove the transmission selector lever.
5.
Remove the transmission control module (TCM).
6.
Installation
Install the TCM.
Torque: 24 Nm
1.
Install the transmission selector lever.
Torque: 13 Nm
2.
Secure and connect the selector lever cable.
3.
Install the air cleaner assembly.
Refer to:
Air Cleaner
(303-12A Intake Air Distribution and Filtering -
I6 3.2L Petrol, Removal and Installation).
4.
Connect the battery ground cable.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
5.
If a new component has been installed, configure using Land Rover
approved diagnostic equipment.
6.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст