Frelander 2. Manual — part 149
6.
7. NOTE: Take extra care when releasing the clips.
Remove the instrument cluster surround.
7.
Remove the ignition switch.
8.
Installation
To install, reverse the removal procedure.
1.
Steering Column Switches - Steering Column Lock Module
Removal and Installation
Removal
• NOTE: On vehicles built from VIN 091770 the steering column lock module may be a non-functional component.
• NOTE: The steering column lock module is retained with 2 X 6mm patch locked, tamper proof bolts.
• NOTE: Removal steps in this procedure may contain installation details.
Disconnect the battery ground cable.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
1.
Remove the steering column.
Refer to:
Steering Column
(211-04 Steering Column, Removal and
Installation).
2.
3. NOTE: Using a suitable stud extraction tool, remove
the tamper proof bolts .
3.
Installation
1.
CAUTION: Tighten the new tamper proof bolts until the
hexagon head shears.
To install, reverse the removal procedure.
1.
Using the Land Rover approved diagnostic system, calibrate a new
module.
2.
Engine System - General Information - Engine
Diagnosis and Testing
For additional information. REFER to:
Engine
(303-01A Engine - I6 3.2L Petrol, Diagnosis and Testing),
Engine
(303-01B Engine - TD4 2.2L Diesel, Diagnosis and Testing).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст