Frelander 2. Manual — part 231

Remove the power steering pump support bracket

8.

Release the power steering pump.

9.

10. NOTE: Discard the gasket.

Remove the coolant pump.

10.

Installation

1. NOTE: Install a new gasket.

Install the coolant pump.

Torque: 17 Nm

1.

2.

CAUTION: The accessory drive belt must be in position

before the power steering pump is installed.

Install the power steering pump.

Torque: 25 Nm

2.

Install the power steering pump support bracket.

Torque: 25 Nm

3. Install the accessory drive belt.

4.

Install the A/C compressor, lower support bracket.

Torque: 25 Nm

5.

Install the air cleaner assembly.

Refer to:

Air Cleaner

(303-12A Intake Air Distribution and Filtering -

I6 3.2L Petrol, Removal and Installation).

6.

Install the battery tray.

Refer to:

Battery Tray

(414-01 Battery, Mounting and Cables,

Removal and Installation).

7.

Install the engine cover.

Refer to:

Engine Cover - I6 3.2L Petrol

(501-05 Interior Trim and

Ornamentation, Removal and Installation).

8.

Connect the battery ground cable and install the cover.

Refer to:

Specifications

(414-00 Battery and Charging System -

General Information, Specifications).

9.

Fill and bleed the cooling system.

Refer to:

Cooling System Draining, Filling and Bleeding

(303-03A

Engine Cooling - I6 3.2L Petrol, General Procedures).

10.

Engine Cooling - I6 3.2L Petrol - Radiator

Removal and Installation

Removal

1.

WARNING: Make sure to support the vehicle with axle

stands.

Raise and support the vehicle.

1.

Remove the bumper armature.

Refer to:

Front Bumper

(501-19 Bumpers, Removal and Installation).

2.

Drain the cooling system.

Refer to:

Cooling System Draining, Filling and Bleeding

(303-03A

Engine Cooling - I6 3.2L Petrol, General Procedures).

3.

4.

Release power steering cooler and secure aside.

5.

6.

7.

8.

CAUTION: Protect the A/C condenser.

Release the A/C condenser and position aside.

8.